Сохранить в закладки 1601246874075:
Technical Requirements | ||||||
1.Before assembly, strictly check and remove sharp angles, burrs and foreign bodies that remain when parts are processed | ||||||
2.After the parts of sliding fit are assembled, the spare parts can move freely and there should be no stuck phenomenon | ||||||
3.Screw When fastening bolts and nuts, do not strike the rear screw slots. The bolt heads of nuts and screws should not be damaged | ||||||
4.The parts and components entering the assembly must have the certificate of the inspection department before assembly | ||||||
5.To sharp edge Angle, remove oil, do not allow scratches collision and other defects | ||||||
6.Engraving logo, font, word height is not strictly limited, but it needs to be clear and durable | ||||||
7.The brand and model information of the standard parts in the drawing is for reference only (it must meet the performance requirements of the same specification and size) | ||||||
8.The scattered parts are assembled and packed according to the drawing |
Новинки товаров от производителей по оптовым ценам