Пользовательские Audi A6 гоночный руль подходит для всех серий A6L A7 RS6 RS7 модификации и обновления

LED Competition Display
Available for most vehicles equipped with OBD II port

LED Units– by default we will use our own unit with the screen. We do offer another option for a flat-top steering wheel with LEDs only and without a screen. If you have a specific requirement we can use LED units from a third party but we will not offer a lifetime warranty as we do on our own unit, it’s $200 for labor to add the LED unit+however much the LED unit cost.

Functions– LED lights will light up as RPM changes, the screen would display engine speed, current vehicle speed, engine load, water temp. Unit is connected to your vehicle via Bluetooth through the OBD II port so some level of delay could be expected. LED lights’ color can be changed in our standard unit.

Installation– No extra wiring for data reading is needed, but you do have to use a multimeter to find out the 12V (+) (positive) and ground (-) (negative) to power up the shift light module. They are usually found in the steering wheel multifunction plugs wiring for most European and American vehicles. Japanese vehicles usually will have to run an extra ACC wire from the closest point to the steering wheel clock spring


Available Materials and Finishes
Carbon Fiber and all the kevlar or hybrid material that’s available in the market, you may choose to purchase your own material or ask one of our exclusive agents here on the available options. 2×2 Twill, 1×1, 4×4, Honey Comb, Forged, Forged with color pearl, Forged with glow in the dark, 2×2 Twill with red/blue/purple/silver/white etc.

Alcantara – We carry dozens of options in stock


Leather – Besides the standard options we list on the site, we can also help in sourcing more color options if you are looking for a particular color/pattern/finish. We also offer the option for you to send in your own material

Painted – Gloss black or any special paint code we got you covered!

Wood Grain – Please email us with a picture if you are looking for a specific finish, we can get 95% close in most cases

Gloss / Satin – all the carbon fiber / painted / wood grain finish can be done in either gloss for a shiny look or matte.


Shape and Thickness
Reshape to your liking – whether it be a cut-off top, flat bottom, flat top, rectangle, triangle, or whatever crazy idea you have, we can make it happen. Just bear in mind we need to keep the core structure so we need to at least keep the horizontal spoke intact and some shapes will be limited by the button layout. But anywhere beyond those areas we can cut, re-weld, and reshape them.

Thickness – some prefer OEM some like it thicker some might want to go even thinner than OEM. Not a problem, we take our time, listen to your request, and will make it happen.


About production：

If the wheels not in stock， need to take about 9 days to produce.