Новый продукт Стоматологическое ультра ясное зеркало рта с конкурентоспособной ценой

Описание и отзывы

Характеристики

New Product dental Ultra clear mouth mirror with competitive price

The following conditions will cause oral mirror damage. Metal powder sprayed by turning metal crown or restoration When cleaning instruments, they were not classified and collided with other sharp parts. Put it in a sterilization pot without separate packaging, and put it in a sterilization blue with the sharp parts of other instruments. Collide with each other The temperature exceeds the standard disinfection temperature. Soak in corrosive disinfectant The scratch of the instrument may not be visible to the naked eye, but after ultrasonic vibration, high temperature disinfection, The corrosive liquid will slowly appear after soaking. The life of lenses will be greatly different due to the doctor's usage habits and the nurse's maintenance and cleaning. The difference.

Why does the anti-fog ability of the mouth mirror decrease? The surface of Ruihao oral mirror is coated with an anti-fog coating to prevent the water vapor breathed in the mouth. Condensed on the mirror to produce fog. If grease adheres to the surface of the mirror, it will destroy the mirror. Anti-fog ability of noodles. This layer of grease mainly comes from the maintenance oil of dental mobile phone and the air compressor on the treatment chair. (no oil-free air pressure is used) or dental materials such as clove oil. Solution: Use the mobile phone maintenance machine to drain the excess maintenance oil, or put the mobile phone on the treatment chair for transportation. Turn it for more than 30 seconds to discharge excess maintenance oil, so as to avoid the oil spray adhering to the mirror surface. Switch to an oil-free air compressor, but pay attention to the residual grease in the pipeline. Use a neutral cleaner to remove grease from the mirror surface. note: Note: high temperature and high pressure steam disinfection can't remove grease, because mobile phone maintenance oil is resistant to high temperature. In addition, with wear, The anti-fog coating will be damaged and the anti-fog ability will be reduced.

Three: What are the precautions when disinfecting the oral mirror? After using the oral speculum, clean it with neutral detergent or enzyme (cleaning enzyme). Saliva, blood and grease, a principle to be grasped in the process is to protect the mirror. Separate cleaning Separate packaging is to prevent other instruments from colliding with the scraping mirror and causing scratches. Besides, be sure to Follow the disinfection method in the instructions, and be sure to pay attention to the temperature control of the disinfection furnace. there are some The temperature control of the sterilizer, especially the domestic sterilizer, is not very good. It is recommended to use 121 degrees and 15 minutes. The pattern of the clock. The imported sterilizer can use the mode of 135 degrees and 4 minutes. So for It is of great significance to prolong the service life of stomatoscope and protect it from high temperature damage. allow What looks like a quality problem is actually caused by the high temperature of the disinfection furnace.

Four: What material can be used to wipe the mouth mirror after cleaning to prevent wear? Soft cloth and gauze can be used, but the wear and tear mainly comes from the use process and other instruments If it collides with or exceeds the disinfection temperature, wiping will not wear the mirror too much. Five: Why didn't the anti-fog ability feel so good when using the oral mirror for the first time? The main reason is that there is no high temperature disinfection before use. Oral speculum must be disinfected before use, even if Even the newly put oral speculum should be disinfected, not only for the purpose of sensing control, but also, High temperature disinfection can activate the anti-fog coating of oral mirror and play an anti-fog effect.