Пластиковая настенная доска для защиты углов низкая цена Потолочная угловая бусина штукатурки

Сохранить в закладки 1601260048426:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики



Customer Good Reviews




Product Display














Products Pictures( both interior and exterior walls)






Specification


Product Name
PVC Corner Bead
Material:
Polyvinyl Chloride,1250 Mesh Calcium Powder, Auxiliary Materials
Weight (grams/m):
45g/m (2cm*2cm*2cm)
LengthDimensions/Descriptions:
Render:5mm,28mmx18mmm
28mmx18mmm
22.25mmx22.25mm
Render:5mm,28mmx16mmm
30mmx30mm
30mmx30mmx0.9mm

Package:
25/50/100 PCS/BOX
Angle:
83°-96°


Application




PVC Corner Bead

The installation methods of European and American PVC Yin-Yang corners are usually as follows:

1. Install the top corner line or other parts: First nail the wooden blocks with cement steel nails at the top corner or other parts where installation is required. The specifications of the wooden blocks are generally 15 (thickness) X60 (width) X50MM long, with a spacing of about 33CM. The nailing of the wooden blocks must match the sliders on the corner line.

2. Cut out the carvings: Before installing each corner, you need to cut out a complete flower from the carved slider in the corner line, planed off the sliding edge, so that it can be glued and covered at the nailing place at the end.

3. Alignment installation: Align the taken corner line with the position of the wooden block on the nailed corner, push open the carved plug-in, and drive in 2-3 steel nails. Push forward a section for each nail. Use glass glue to glue the pre-cut carvings on the last interface to cover the nail holes to achieve a seamless effect.


Others
It is widely used for reinforcement of walls, keeping warm exterior walls and water-proof of building roofs. Other than those,
they are the wall reinforcement of cement, plastic asphalt, marble, mosaic ,etc. It is an ideal material for construction.





Product Process

1.Inquiry
-> Negotiation -> Quote -> Place an order -> Mold design

2.Check/Approved->Make the mold->Do sample->Sample confirmed

3.Do mass production->Inspect/QC->Transport



Why Choose us
















Team / Cooperation / Exhibition




Our Certificate











Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам