Высокое качество прочный с использованием различных надежных звуковых динамиков

Сохранить в закладки 1601271370090:


Цена:175 987,79-198 603,31 ₽*

Количество:

  • В избранное

Описание и отзывы

Характеристики







M-F3A PRO
Our M-F3A PRO is an ultra-compact active line array system that offers crystal-clear sound reproduction with punchy studio-quality mids and highs due to its hornless design.

The unique PA sound is achieved by integrating 8 high efficiency 2.8″ neodymium midrange drivers and 7 x 1″ dome tweeters with direct unit dispersion. All these drivers are designed for high efficiency and extended LF bandwidth. This lowers the low-mid cut-off frequency, giving voices an exceptionally rich and natural sound.

All drivers are mounted on an A4 sized front surface. Each unit reaches up to 129 dB peak SPL and weighs only 8 KG, including amplification and DSP. The distinctive sound of the M-F3A PRO is achieved by a 2-channel Class D 600 W power amplifier, delivering 2x 300 W RMS to the tweeters and midrange drivers.

Two controls, the level and line unit selector, provide precise adjustment of key system parameters, such as attenuation and timbre, depending on the number of units in the array.


Features


Dome tweeter
In a footprint the size of an A4 sheet of paper, there are 8 highly efficient 2.8-inch neodymium midrange drivers and 7 1-inch dome tweeters. That’s why the M-F3A PRO delivers its characteristic, impressively direct dispersion and its clear, full and rich sound even over long distances.


Integrated DSP
Each M-F3A PRO is equipped with a 600W (300W HF and 300W MF) Class-D power amplifier with switching power supply for minimum weight and maximum flexibility anywhere in the world. In addition, our built-in 24-bit/48 kHz DSP processor provides signal filtering and ensures maximum driver protection with minimum error rate.


EASE®
AFMG® EASE® and EASE® Focus 3 GLL files are available for the entire M-F3A PRO family. This allows users to simulate and calculate various parameters such as range, sound pressure level, frequency response, spread angle, delay times and more. The corresponding files are available in the Downloads section.
EASE® and AFMG® are registered trademarks of AFMG Technologies GmbH.



Specification




Model: M-F3A PRO
ACOUSTICAL
AMPLIFICATION
Frequency range (-3 dB): 140 Hz – 20 kHz
Frequency range (-10 dB): 100 Hz – 20 kHz
Coverage angles (-6dB) [H x V]: 120° x 16°
Maximum Peak SPL *: 129 dB
System type: 2-way active
Crossover frequency: 1.9 kHz
Transducers: MF: 8 x 2.8″ drivers
HF: 7 x 1″ dome tweeters
Enclosure type: Vented box
Type: 2 channel, class-D with SMPS
Total Power **: 600 W
Output power per channel: MF: 300 W HF: 300 W
Protection: Short circuit, overheating, overcurrent
Connectors: Input signal: balanced XLR 3-pin female
Link output: balanced XLR 3-pin male
Power input: powerCON® 20A
Power link output: powerCON® 20A
Wiring: Pin N: Neutral
Pin L: Conductor
Pin E: Ground
Input sensitivity: 0 dBu
DSP: 48 kHz/24 bit with extended dynamics
Processing latency: 1.1 ms
Processing: Level, factory EQ presets
User controls: Power: On/Off switch
Level: 8-position rotary knob (-50, -20, -10, -6, -3, -2, -1, 0)
Line units: 8-position rotary knob (1 – 8+)
MECHANICAL
ACCESSORIES
Product dimensions [H x W x D] (Including rigging): 317 x 265 x 359 mm
Net weight: 8.3 kg
Packaging dimensions [H x W x D]: 388 x 290 x 440 mm
Total weight: 9.5 kg
Cabinet: 12 mm plywood
Cabinet finishing: Black or white polyurea coating
Grille: Powder coated perforated steel
Hardware: Rear handle in 12 mm plywood
plus side grips embedded in cabinet
Rigging: Three-point rigging system, 3 x SE Audiotechnik® 6 mm locking pins
Splay angles: 0º, 1º, 2º, 3º, 4º, 6º, 8º
Bumper frame: M-F3A BF
U-bracket: M-F3A UB
Flight case (4 units): M-F3A FC
Carry-on bag (1 unit): M-F3A CTB
Transport kart (up to 4×4 units): M-F3A PRO TK44
Line rain cover (8, 12 or 18 units): M-F3A PRO FRC 8 / 12 / 18














A) What is the ordering process?
1. Quotation - Provide us with all clear requirements (total quantity and packaging details)
2. Quotation - formal quotation from our professional team with all clear specifications
3.Marked samples to confirm all quote details and final samples
4. Production - mass production
5. Transportation - by sea or by air

B) What is your payment method?
As for the payment terms, it depends on the total amount.

C) How do you ship?
Sea freight, air freight, express, TNT, DHL, FedEx, UPS, etc. It depends on you.

D) What is the average delivery time?
Samples usually take 10-15 days depending on product type. Bulk orders usually take about 30 days.

E) How can I get the wholesaler's price list?
Please send us an email or Whatsapp-us, tell us your site area and the minimum MOQ for each order. We will send you a competitive price list as soon as possible.


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам