MR101 полиуретановая гидроизоляционная Водонепроницаемая шламовая смола

Сохранить в закладки 1601281469013:


Цена:1,25-1,50 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики


Product descriptions from the supplier 

















 
































    The MR101 universal waterproof slurry is the lated technical construction waterproof mortar material with the ability of acid-resistance,alkali-resistance.The MR101 has the permeability to substrate.resistant to the minor cracks. It’s speed of solidification is largely quicker than other coating,at the same time, the product can also be in a higher level in the anti-high or low temperature environments. The MR101 universal belongs to one type of rigid waterproofing coating chemical. It includes two components, liquid part and powder part.
-Can be worked directly on the wet or damp substrate projects. -The film has the ability to anti- 40 Celsius below zero and 100 Celsius over zero. -The active penetration of the crystallization of ingredients containing in this product has the ability to repair minor cracks and will form a waterproof layer between the bases and air environment. -Non-toxic,harmless and environmental-friendly products can be directly used for pools and Ponds. -The film can be anti-acid and alkali,inhibit mold and anti corrosion .










SUBSTRATES & APPLICATION




- Interior and outdoor cement constructures,(such as bathroom,kitchen), brick and light brick structure. - Basements,bridges,high-speed rail,subway station,tunnels,civil air defense projects,mines,foundation,floor walls and ground. - Before paving stones,tiles,wallpaper,gypsum board,the waterprofo mortor is used for the front layer processing to meet the needs of waterproofing and anti-efflorescence.









TEMPERATURE CONTROL




- Keep the substrates surface dry and without dust.
-Two coats brush requested. After the 1st coat dry then apply the 2nd coat in a perpendicular direction with first coat.
-Proper application temp is 5℃-40℃.
-Dry time is 8h with temp 23℃.The lower temp, the longer dry time.












APPLICATION




- Pour the white liquid into clean container then put the powder into it slowly, in the meantiem,stir the mixture with electrical blender.The mixing tools are motor stirrer with stirring time 2 mins, keep the mixture still for 2 mins, then stir another 2mins. - Fully brush the mixture on the wet base or wall.Generally, brush 2 coats and keep vertical for two coats. -The second coat starts after the 1st coat completely dry(about 4-8 hours) -Maintain intermittent stirring to prevent precipitation during operation. After application,some water is needed to make maintenance. - After the waterproof mortar layer finished, generally,they layer can be directly face water soak. To reach a better waterproof performance, had better need a cement layer to apply as the protective layer on the waterproof mortar.









CLEANING




Clean the application tools with water once work finished.









ANNOUNCEMENTS




Notice that the MR101 universal waterproof slurry is water based product, could be frozen in the tem under 0℃!


















































































Appearance


White emulsion part + Powder part


Solid content


>80%


Density,g/cm3


>1.09


Tensile Strength


2.2 MPa


Elongation ar break %


250


Foldability at Low Temperature


(--10C) No cracks


Heating ratio of expansion and contraction%


2%


Watertight ( 0.3MPa, 30min)


watertight


Surface drying time


6h


Hard drying time


18h


Bonding strength on wet substrates


1.41Mpa


Artificial weathering aging(720h)
Retention Tensile Strength


103%


Retention tensile strength %

(Heat treatment)


-


Retention tensile strength %
(Heat treatment)


-


For further details, please contact with the manufacturer.















 














 






 




































 
















 






































 







































1. who are we?
We are based in Beijing, China, start from 2001,sell to Southeast Asia(25.00%),Africa(21.00%),Eastern Asia(10.00%),Mid East(10.00%),South Asia(8.00%),North America(8.00%),South America(5.00%),Northern Europe(3.00%),Eastern Europe(3.00%),Southern Europe(3.00%),Central America(2.00%),Western Europe(2.00%). There are total about 101-200 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
polyurethane Waterproof Material,polyurethane coating special for railway,SPUA,Acrylic acid coating,JS cement-base waterproof coating

4. why should you buy from us not from other suppliers?
1 More than 20 years manufacture experience in waterproof industry. 2 With the same test facilities to the national laberatory. 3 Largest waterproof material manufacturer in China with general all categories

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese






Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам