Промышленный ультразвуковой увлажнитель для текстильных грибов 7/14/21/28 кг/ч

Описание и отзывы

Характеристики

10 Head 1.7MHZ Waterproof Mist Maker Humidifier Vegetables And Flowers Ultrasonic Humidity Controller

The ultrasonic atomizer uses electronic high-frequency oscillation (the oscillation frequency is 1.7MHz or 2.4MHz, which exceeds the range of human hearing, and the electronic oscillation will not harm humans and animals), through the high-frequency resonance of the ceramic atomizer, to remove liquid water The molecular structure breaks up to produce a natural and elegant water mist, without heating or adding any chemical reagents. Compared with the heating atomization method, energy saving is 90%. In addition, a large number of negative ions will be released during the atomization process, which will react electrostatically with smoke and dust floating in the air to precipitate them. At the same time, it can effectively remove formaldehyde, carbon monoxide, bacteria and other harmful substances, so that the air can be purified. Reduce the occurrence of diseases.

Ultrasonic atomizer adopts high-efficiency integrated circuit, ultra-small and integrated unique structure design, and important parts adopt high-quality atomizer. Humidifier, incense, beauty machine, disinfection machine, bathtub fog machine, bonsai, handicrafts are widely used.

Ultrasonic atomizer series products, from single nozzle to multiple nozzles, from unstable flange mounting structure to high-performance input type, from water atomizer to atomizer resistant to strong oxidants such as chlorine dioxide, from zinc Alloy shell to brass and stainless steel shell, choose the atomizer product model, and adjust the parameters and process of the atomizer reasonably.

1. The atomizer must be connected to a special power supply that matches its voltage, and it is forbidden to use it directly with the mains.

2. The above atomizers all use the frequency 1.7MHZ, the diameter of 20mm, and the wire-free atomizer.

3. Atomization water level: from the bottom of the atomizer to the water surface, the water depth is 70-90mm.

4. Water pH requirements: neutral water between PH5-PH8, can not atomize strong acid, alkali, salt; oil, alcohol, washing water, etc.

5. Water level suitable for atomization: 20℃ -50℃ water. Below 20℃, the fog volume will weaken until none, and if it exceeds 55℃, ultra-high temperature protection will be activated.

6. When placing multiple atomizers in the same container, please use wires to make the shells conduct each other to avoid discharge corrosion due to potential difference.

7. Do not forcibly fix the float of the sensor to avoid failure to start the shutdown protection function when there is water shortage.

8. When the atomizer needs to be moved or lifted out of the water, the power supply must be disconnected before operation, so as to avoid the float sliding to the top to start the spraying action during the operation, resulting in dry burning and bursting of the atomizing piece of the nozzle, and serious injury operators.

9. The metal shell of the atomizer is its positive circuit, there will be a weak current in the water, and those who install the electronic heart are forbidden to touch it!