80*100 Большой размер ручной слушания пресс машина

Сохранить в закладки 1601292901974:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики






80*100 Large Size Manual Hear Press Machine 




Product Description


 Machine Features
1. The heating plate adopts special ultra-precision wire tube technology, which can effectively ensure the    temperature balance and peace;
2. Full digital temperature time display, temperature error ( 2 C);
3. The spiral pressure design makes it easy to adjust the required working pressure at will;
4. Designed according to the principle of leverage, beautiful and refined


 





















































Items      
Model PT-H101 PT-H102 PT-H103
Printing Area 38*38cm  40*50cm 60*80cm
Max temp. 260 C(500 F) 260 C(500 F) 260 C(500 F)
Voltage 220/110V 220/110V 220/110V
Power 1.2 KW  1.8KW  3.5KW
G.W.(kgs) 25kg 30KG 40 KG
Machine Size(mm)  750*400*400  750*430*580  750*630*880

 


Machine Pictures: 



 






FAQ


 


The operation steps


1. Plug in the power and turn on the main power switch.


2. Adjust the time and temperature required.


3. After adjusting the temperature and time, the red light is on, waiting for the machine to heat up.


4. After the temperature rise is completed, the red light of the thermometer is extinguished, and then flashes (when keeping warm).


5, the clothes are placed flat on the silicone pad, and then put on the hot paper, (pay attention to the front and back of the hot paper) push the table to the hot pressing position, flatten the article, put the hot paper, then put the high temperature cloth, press Lower handle, small green light flashes, hot stamping starts, time counts down.


6. When finished, the buzzer sounds. Lift the handle, the green light is off, stop working.


7, the items are hot. If the cold torn hot paper, please wait 5-10 seconds before tearing off the hot paper. If it is hot torn hot paper, please stamp the hot paper immediately after hot stamping.

 


Maintenance matters:


1. Pressure: If the pressure is not enough or too large, adjust the pressure screw to increase the pressure in the clockwise direction and reduce the pressure in the counterclockwise direction.


2. Time: When the hot stamping time arrives and the buzzer does not ring or keep sounding, check whether the micro switch contact point in the tail box is moderate. If it is not suitable, adjust it to the appropriate position.


3. Temperature: Preheat for about 15 minutes. When the temperature reaches the set temperature, the heating indicator will be off, and hot stamping can be started. If the heating plate does not heat up for a few minutes after starting up, please check the line.


4. When the handle is pressed down to the bottom, the hand is released and the handle is automatically raised. Please adjust the adjusting nut above the heating plate downwards; when the hot stamping is completed, the handle can be lifted upwards, and the adjusting screw can be lifted upwards. Adjustment.


Contacts








Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам