3g высокого давления впрыска винтовой насос дизельный высоковязкий
95 025,51-108 600,58 ₽
ZW одноступенчатый горизонтальный самовсасывающий канализационный насос может быть настроен из нержавеющей стали
- Категория: >>>
- Поставщик: Shandong Zhongrong Fuxing Group Co. Ltd.Shandong Ltd.
Сохранить в закладки 1601296397709:
Описание и отзывы
Характеристики
VR
1、 Introduction to ZW self priming non clogging sewage pump
ZW type self-priming non clogging sewage pump is a new type of pump which integrates self-priming and sewage discharge according to the structure and performance of ZX self-priming centrifugal pump and QW submersible sewage pump, and drawing on the advantages of similar products abroad. It can be like the general water self-priming pump The sample does not need to install the bottom valve, does not need to inject water, but also can suck the dirt, sediment, waste mineral impurities, sewage and colloid liquid of fecal treatment project, which contains 60% of the diameter of the outlet diameter and the fiber length is 1.5 times of the impeller diameter. It can completely reduce the labor intensity of manpower, and is easy to install and use, with few maintenance and good performance. It has a broad application market and development Prospects
The company has strong technical force, rich production experience and perfect detection means, and the product quality is stable.
2、 Advantages of ZW self suction non clogging sewage pump:
1. Strong discharge capacity: impeller anti blocking design, high efficiency and no blockage.
2. High efficiency and energy saving: good hydraulic model is adopted, and the efficiency is 3-5% higher than that of general self-priming pump.
3. Good self-priming performance: the self-priming height is 1 m higher than the general self-priming pump, and the self-priming time is shorter.
ZW type self-priming non clogging sewage pump is a new type of pump which integrates self-priming and sewage discharge according to the structure and performance of ZX self-priming centrifugal pump and QW submersible sewage pump, and drawing on the advantages of similar products abroad. It can be like the general water self-priming pump The sample does not need to install the bottom valve, does not need to inject water, but also can suck the dirt, sediment, waste mineral impurities, sewage and colloid liquid of fecal treatment project, which contains 60% of the diameter of the outlet diameter and the fiber length is 1.5 times of the impeller diameter. It can completely reduce the labor intensity of manpower, and is easy to install and use, with few maintenance and good performance. It has a broad application market and development Prospects
The company has strong technical force, rich production experience and perfect detection means, and the product quality is stable.
2、 Advantages of ZW self suction non clogging sewage pump:
1. Strong discharge capacity: impeller anti blocking design, high efficiency and no blockage.
2. High efficiency and energy saving: good hydraulic model is adopted, and the efficiency is 3-5% higher than that of general self-priming pump.
3. Good self-priming performance: the self-priming height is 1 m higher than the general self-priming pump, and the self-priming time is shorter.
3、 Technical parameters of ZW self suction non clogging sewage pump:
Flow: 5-800m3 / h;
Lift: 12-60m;
Motor power: 2.2-55kw;
Speed: 1450-2900r / min;
Diameter: φ 25 - φ 300;
Medium temperature: ≤ 100 ℃;
Self priming height: 4.5-6.0m.
4、 ZW type self priming non clogging sewage pump
1. The shorter the suction pipe, the better, and the length should not exceed 10m.
2. If the pump is used to pump thicker and sticky slurry, it is necessary to clean the pump cavity to prevent sediment left in the pump.
3. When the self-priming pump is used for the first time, the pump chamber still needs to be filled with water.
4. After 3000 hours of normal operation, the water pump should be disassembled for inspection and maintenance, and the vulnerable parts that are not suitable for reuse should be replaced when necessary.
5. This pump can be made to order, with high concentricity, enhanced stability and more economical, but maintenance is a little troublesome.
Flow: 5-800m3 / h;
Lift: 12-60m;
Motor power: 2.2-55kw;
Speed: 1450-2900r / min;
Diameter: φ 25 - φ 300;
Medium temperature: ≤ 100 ℃;
Self priming height: 4.5-6.0m.
4、 ZW type self priming non clogging sewage pump
1. The shorter the suction pipe, the better, and the length should not exceed 10m.
2. If the pump is used to pump thicker and sticky slurry, it is necessary to clean the pump cavity to prevent sediment left in the pump.
3. When the self-priming pump is used for the first time, the pump chamber still needs to be filled with water.
4. After 3000 hours of normal operation, the water pump should be disassembled for inspection and maintenance, and the vulnerable parts that are not suitable for reuse should be replaced when necessary.
5. This pump can be made to order, with high concentricity, enhanced stability and more economical, but maintenance is a little troublesome.
Fault phenomenon | Possible causes | Exclusion method |
1.There is no liquid storage in the pump shell 2. Air leakage in suction pipe 3. The speed is too low 4. The suction head is too high or the suction pipe is too long 5. The leakage of mechanical seal is too large 6. The gas in the suction line cannot be discharged from the outlet | 1. Add enough storage liquid 2. Check and eliminate air leakage 3. Adjust the speed 4. Reduce the suction head too high or shorten the suction line 5. Repair or replace 6. Let it out | |
1. The foundation is not stable 2. The pump shaft is bent 3. Cavitation 4. The bearing is seriously worn 5. There are impurities in the inlet pipeline 6. The main shaft of pump and motor are not concentric | 1. Reinforcement 2. Replace or correct 3. Adjust the working condition 4. Replacement 5. Remove debris 6. Adjust the coaxiality | |
1. Impeller passage and suction pipe are blocked 2. The impeller or impeller seal is seriously damaged 3. Insufficient power or low speed | 2. Replace the ring 3. Add enough power and adjust to rated speed | |
1. excessive flow 2. the speed is too high 3. the pump shaft is bent or the impeller is jammed 4. the flow passage in the pump is blocked or stuck | 2. Reduce it appropriately 3. Replace or correct 4. Remove the blockage |
Похожие товары
Производитель Китай электроэнергетика не засоряющиеся самовсасывающий канализационный насос
113 125,60-135 750,72 ₽
Оптовая цена большой мощности Электрический спиративный насос смешанного потока
272 745,83-275 008,34 ₽
Серия CBN шампунь из нержавеющей стали жидкостный трансферный насос
26 018,89-28 281,40 ₽
Погружной песковый бентонит экскаватор смонтирован грунтового насоса с фрезерный свайно-папильонажный земснаряд головкой
631 240,85-633 503,36 ₽
Сухой вакуумный грунтовочный насос без засорения водяной с дизельным приводом сельскохозяйственный
622 190,80-791 879,20 ₽
Гидравлический блок питания 220 В гидравлический насос electr 10000 psi 700 бар высокого давления 2000 Вт портативная электростанция
Электрический bombas hidraulicas 0.75kw маленькая гидравлическая силовая установка гидравлический насос 220 в течение 25 тонн Домкрат
Новые поступления
Новинки товаров от производителей по оптовым ценам
Выключатель для формованного корпуса Schneider NSX100N 50KA AC 3P3D 25A TMD новая модель C10N3TM025
Буф2-.. М .. Краны
Оптовая продажа высококачественный сублимированный клубничный порошок Заводская поставка
5,50-6,40 $
Инструмент для снижения ударов и вибраций бурения на месторождениях гидравлические амортизирующие Подводные устройства с радиальным осевым направлением
12 000-14 000 $
Резьбовые титановые трубы ПВХ оболочка теплообменника для тепловой насос плавательного бассейна охладитель аквариума испарителя
147-182 $
Корица специи продукты Конкурентоспособная цена на экспорт из Вьетнама оптовая продажа высокое качество корица натуральные
5,50-6,40 $
Цепь из нержавеющей стали с большим шагом сверхпрочная цепь трансмиссии C2052/C2062/C2082 промышленная гибочная
