Мобильное приложение программируемый гибкий светодиодный экран прокручивания автомобиля рекламная матрица панель окна дисплей

Сохранить в закладки 1601299836416:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики


6_016_026_036_046_056_066_076_086_096_106_116_126_13



Tony



Immersion type LED module

Immersion type LED module is a type of LED module with a special waterproof design, which can to some extent prevent moisture from entering the interior of the module, thereby protecting the electronic components inside the module from damage. The design focus of this module is on waterproofing and drainage to ensure normal operation in humid environments.


 


 


Structural characteristics
Immersion LED modules typically have the following characteristics:
Waterproof troughs and drainage holes
-Waterproof groove: The outer edge of the module is equipped with an inward concave waterproof groove, which can prevent rainwater or other moisture from directly contacting the PCB board and other electronic components of the module.


 



-Drainage holes: There is a set of drainage holes located on the waterproof groove at the bottom of the bottom shell, close to the side of the PCB board. This design can actively drain the accumulated water inside the module, avoiding the failure of the three protective coatings and product damage caused by long-term immersion of the PCB.


 


 


Waterproof level

-IP65 waterproof level: The waterproof level of outdoor LED modules usually needs to reach IP65, which means it can prevent water from various directions emitted by the nozzle from entering the electrical appliances, but it cannot be soaked in water for a long time.


 


matters needing attention

Although immersion LED modules have certain waterproof capabilities, the following points still need to be noted during use:

-Avoid prolonged soaking: Even waterproof equipment with IP65 rating should not be soaked in water for a long time. If long-term soaking is required, it is recommended to use IP68 LED floodlights.

-Timely drainage: Ensure that the drainage holes are unobstructed, so as to promptly drain the accumulated water inside the module.


 


Parameters of Immersion LED Module

Immersion type LED module is a type of LED module with waterproof function, and its parameters mainly include the following aspects:
1. Size
Size is one of the basic parameters of LED modules, including length, width, and height. In immersion LED modules, these dimensions can affect the installation and usage of the product.
2. Brightness
Brightness is a parameter that customers are particularly concerned about. In immersion LED modules, brightness is usually a combination of luminous intensity and lumen. Generally speaking, the higher the brightness, the better the lighting effect.




Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам