Сохранить в закладки 1601354850033:
Technical parameter
Product name:Protection Circuit Module
Model No:PCM-L08S100-H99(A-1)
For 6S-8S Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs
Product Feature:
1. Suitable for 6-8 section Lithium-ion/Lithium Polymer/LiFePO4 Battery Packs;
2. Maximum continuous working current 100a, same charging/discharging interface;
3. Overcharge, overdischarge, short circuit, overcurrent, temperature protection, etc.;
4. The metering IC adopts BQ34Z100,which can read the total voltage, capacity, current, temperature, cycle times and other parameters;
5. The required information can be read through the display screen of modelPCM-LCD001-415;
6. Equipped with low-temperature heating function;
Items | Specifications | |||
Lithium-ion/Lithium Polymer | LiFePO4 | |||
Communication Interface | HDQ/I2C/Bluetooth | |||
Capacity | Designing battery capacity | 100Ah | ||
Max capacity(Battery pack) | 290Ah | |||
Min capacity(Battery pack) | 100mAh | |||
External capacity Indication | LCD,LED,SOC | |||
Gas gauge algorithm | Impedance Track | |||
Voltage | Charging voltage(8S) | 33.6(4.2V/Cell) | 28.8V(3.6V/Cell) | |
Cell-balance window | 50mV±10% | |||
Cell-balance release voltage | 20mV±10% | |||
Cell-balance detection delay time | 0.5~2s | |||
Current | Balance current for single cell | 34 ± 3mA | 29 ± 3mA | |
Normal operating-mode current (Gas Gauge IC) | 800uA | |||
SLEEP operating-mode current (Gas Gauge IC) | 200uA | |||
FULL SLEEP operating-mode current (Gas Gauge IC) | 1uA | |||
Maximal continuous charging current | 100a(Max) | |||
Maximal continuous discharging current | 100a(Max) | |||
Over charge Protection | Over charge detection voltage | 4.25±0.025V | 3.80±0.05V | |
Over charge detection delay time | 1~2S | 1~2S | ||
Over charge release voltage | 4.05±0.05V | 3.55±0.05V | ||
Over discharge protection | Over discharge detection voltage | 2.5±0.07V | 2.00±0.05V | |
Over discharge detection delay time | 1~2S | 1~2S | ||
Over discharge release voltage | 3.0±0.1V | 2.7±0.05V | ||
Over current protection | Over current detection voltage | 0.2±0.015V | ||
Over current detection current | 500±50a(can adjust) | |||
Detection delay time | 5~60ms | |||
Release condition | Cut load | |||
Short protection | Detection condition | Exterior short circuit | ||
Detection delay time | 200-800us | |||
Release condition | Cut load | |||
Resistance | Protection circuitry (MOSFET) B- to P- | ≤20mΩ | ||
Temperature protection | Charge temperature protection | 60℃±5℃ | ||
Charge release temperature | 50℃±5℃ | |||
Discharge temperature protection | 65℃±5℃ | |||
Discharge release temperature | 55℃±5℃ | |||
Operating Temperature Range | -40~+85℃ | |||
Storage Temperature Range | -40~+125℃ | |||
Dimension | L210*W115*T12mm | |||
B+:Battery+ | ![]() | |||
B-:Battery- | ||||
J3,J4:I2C Communication interface | ||||
TH+:Heating Film positive electrode | ||||
TH-:Heating Film negative electrode | ||||
HDQ:Open drain HDQ Serial communication line (slave) | ||||
RT1,RT2,RT3,T1: Battery temperature detection NTC | ||||
T2:MOSFET temperature detector | ||||
RT4:Heating cloth temperature detector | ||||
P+:Charge+/discharge+ | ||||
P-:Charge-/discharge- |
Новинки товаров от производителей по оптовым ценам