The MR101 universal waterproof slurry is the lated technical construction waterproof mortar material with the ability of acid-resistance,alkali-resistance.The MR101 has the permeability to substrate.resistant to the minor cracks. It’s speed of solidification is largely quicker than other coating,at the same time, the product can also be in a higher level in the anti-high or low temperature environments. The MR101 universal belongs to one type of rigid waterproofing coating chemical. It includes two components, liquid part and powder part.
-Can be worked directly on the wet or damp substrate projects. -The film has the ability to anti- 40 Celsius below zero and 100 Celsius over zero. -The active penetration of the crystallization of ingredients containing in this product has the ability to repair minor cracks and will form a waterproof layer between the bases and air environment. -Non-toxic,harmless and environmental-friendly products can be directly used for pools and Ponds. -The film can be anti-acid and alkali,inhibit mold and anti corrosion .
SUBSTRATES & APPLICATION
- Interior and outdoor cement constructures,(such as bathroom,kitchen), brick and light brick structure. - Basements,bridges,high-speed rail,subway station,tunnels,civil air defense projects,mines,foundation,floor walls and ground. - Before paving stones,tiles,wallpaper,gypsum board,the waterprofo mortor is used for the front layer processing to meet the needs of waterproofing and anti-efflorescence.
TEMPERATURE CONTROL
- Keep the substrates surface dry and without dust.
-Two coats brush requested. After the 1st coat dry then apply the 2nd coat in a perpendicular direction with first coat.
-Proper application temp is 5℃-40℃.
-Dry time is 8h with temp 23℃.The lower temp, the longer dry time.
APPLICATION
- Pour the white liquid into clean container then put the powder into it slowly, in the meantiem,stir the mixture with electrical blender.The mixing tools are motor stirrer with stirring time 2 mins, keep the mixture still for 2 mins, then stir another 2mins. - Fully brush the mixture on the wet base or wall.Generally, brush 2 coats and keep vertical for two coats. -The second coat starts after the 1st coat completely dry(about 4-8 hours) -Maintain intermittent stirring to prevent precipitation during operation. After application,some water is needed to make maintenance. - After the waterproof mortar layer finished, generally,they layer can be directly face water soak. To reach a better waterproof performance, had better need a cement layer to apply as the protective layer on the waterproof mortar.
CLEANING
Clean the application tools with water once work finished.
ANNOUNCEMENTS
Notice that the MR101 universal waterproof slurry is water based product, could be frozen in the tem under 0℃!
HPU101 полиуретановое покрытие крыши js цемент водонепроницаемое другие гидроизоляционные материалы
1,78-1,98 $
Металлическая крыша цветная Стальная Плитка специальное водонепроницаемое покрытие антикоррозийный материал краски герметичный клей для ремонта ремонт
2,00 $
Водонепроницаемая резиновая водяная остановка с центральной лампой
0,20-0,60 $
Водонепроницаемый Герметичный Материал для ремонта кровли Модифицированная резиновая Водонепроницаемая краска
Современный дизайн полиуретановая Модифицированная резина водонепроницаемая краска герметичный материал для ремонта крыши водостоковое покрытие наружного использования
Экологичный синий K11 цемент Водонепроницаемая краска для крыши трубы