8 дюймовые пассивные колонки

Сохранить в закладки 1601364383937:


Цена:389,74-428,71 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики





Company Profile


ARVOX Audio Company profile
ARVOX was founded in 2006 and has more than 10 years of experience in R&D and manufacturing. In the field of Public address system, Conference system, Professional sound system manufacturing ranks in the top 5.

The company is well known for quality and performance, with partners in more than 98 countries, and can adapt to different national government regulations and customer habits to ensure smooth communication, professional service and support.

We have more than 8000 square meter of professional production plant, with strong production capacity, mass production only takes 1-3 weeks. And can do 1 hour quick response to customer needs, after-sales service is also guaranteed, providing 24 months warranty.







Product Paramenters








Model NO.
VTX208-P
VTX208B-P
Type
Passive Dual 8" two-way line array speaker
Passive single 18" linear sub-low array speaker


Horn unit
LF 2*8"
ferrite / voice coil Φ51mm / magnetic steel Φ170mm 
HF 1*1.73" 
ferrite /  Voice Coil Φ44mm / Magnet Φ120mm

LF 1*18"
ferrite / voice coil Φ100mm / magnetic steel Φ220mm
Rated impedance
LF 4Ω; HF 8Ω
8 Ω
Rated power (AES)
LF 350W / HF 100W
800W
Peak power (AES)
LF 1400W / HF 400W
3200W
Frequency response (-3db)
55Hz-18KHz
35Hz-200Hz
Sensitivity (1m/1w)
LF 102dB; HF 112dB
98dB
Directivity (H * V)
135° * 10° vertically adjustable
no directivity
Maximum sound pressure level (1m/1w)
LF 128dB (continuous) / 136dB (peak)
HF 132dB (continuous) / 139dB (peak)
127db (continuous)/136dB (peak)
Surface treatment
Black sand paint
Black sand paint
Plate
15mm multi-layer birch plywood
18mm multi-layer birch plywood
Overall dimension (w*d*h)
620*420*250mm
620*800*540 mm
Weight
18kg
45kg
Grid
Hexagonal mesh + inner covered sound-transmitting mesh cotton
Hanging
M8 screw hanging point
4-point hanging
Amplifier module
2 channels
Single channel
Output power
750W/250W @ 8Ω
1300W @ 8Ω
Voltage requirements
220V ~50Hz
Circuit type
Class D
Cooling method
Efficient fan cooling
Total harmonic distortion
≤1% @1kHz, full power 8Ω
SNR
100dB @20 Hz - 20kHz A-weighted @8Ω
Input sensitivity
0.775V
Input impedance
20KΩ
DSP
48 kHz, 24-bit DSP processor, delay: 1.1 ms
Signal Processing
Speaker DSP Preset, Delay, EQ: HPF/LPF, Parametric EQ (Q, F, Gain), 
RMS Limiter, Peak Limiter, Invert, Mute, Input Gain
Control
RS-485/USB
Protection
Short circuit, thermal protection, overcurrent protection
AC power input/output
Neutrik PowerCon (Max: 15 A) (up to 6 in series) (220 V: 6 pcs)
Audio input/output
XLR 3-pin female line-level input


After-sales service and testing


ARVOX offers a 12-month warranty and, where required, we provide remote guidance for installation and operation.
If the parts are damaged, within the warranty period, we will air the parts or the whole product to the customer for installation and replacement.




Salt spray Tester
Speaker Aging Box
Bending Tester
IPX7 Waterproof Test Box
Air Tightness Detector
Battery Tester
Bending Tester
Stable Voltage Tester
Horn Frequency Sweeper
Horn Curve Tester
Charging Stand


Exhibition and application scenarios




Quality certification


We support certificate inspection and we can also register new certificates for products based on customers' special requirements and the standards of different countries. Through these measures, we can ensure product quality in all aspects, so that every transaction can be carried out in a safe and reliable environment, eliminating your worries.




Packaging & Shipping


Multiple packaging + multiple protection
Professional packaging, attention to detail, all for the sake of customers
1. in the product packaging we use foam filling protection 
2. The outer layer of the product packaging will also have foam filling protection 
3. Under the protection of the large box on the outer layer of the inner packaging, we will also fill two layers of foam protection on the inside and outside. Finally, we will fix the product with plastic packaging, and then pack the outer layer, and also add foam filling protection.






Customer feedback




FAQ


Q: Are you Manufacturer or Trading company?
A: Yes, we are a factory. We have more than 12 years experience in researching and manufacturing
Q: Do you have any qualification certificate?
A:Yes, we have theCCC.CE and ROHS certificates
Q: Is sample available?
A: Yes, sample order is welcome.Average delivery for sample is around 7-10days.
Q: Can I use my own Logo?
A: Yes, you can use your own Logo. We are rich experienced in OED/ODM orders. Q: Could you produce the products according to our request?
A: Of course, we have experienced eigineers to design the expected items as you want, we have much experience at ODM. Q: What is your payment terms?
A: T/T payment or Visa Card via alibaba.com 30% deposit payment before production, and 70% balance payment before shipment.
Q: What would the delivery time be?
A: Regularly 15-30 days since deposit received depends on different quantities.
Q: Shipping documents to be provided.
A: Invoice, packing list, Bill of lading for all shipments. CO, CQ, FORM E available when requested.
Q: Warranty.
A: 24 months after shipment


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам