Сохранить в закладки 1601370819247:
1:What are the advantages of Dingxin water meter for leak control? |
From the perspective of measurement, using high-precision water meters can reduce measurement leakage. The range ratio of Dingxin water meter can reach up to R800, and the starting flow rate can reach as low as 1L/h, with a wider measurement range. Mechanical meters have high starting flow rates, and compared to mechanical meters, we can accurately measure small flow rates that cannot be measured by mechanical meters. Although the reduction in leakage water from each terminal is not significant, the number of terminal measurements is too large, resulting in a large total. |
2:Is there a rotation issue? Will there be a measurement if there is no water in the pipeline, just air flow? |
This problem often occurs in mechanical water meters, and ultrasonic water meters do not have this situation. From the principle of ultrasonic measurement, the propagation speed of sound waves in water (about 1500m/s) is approximately 4.4 times that in air (about 340m/s). Ultrasonic water meters can detect the presence of water in pipelines through the transmission time of sound waves. If there is no water, no measurement will be generated and an "air traffic control" alarm will be reported. |
3:What is the frequency of measurement? |
It is measured once per second, that is, the frequency is 1Hz, and the measurement error can meet the requirements at this measurement frequency. At the same time, the metering frequency can be configured, but increasing the metering frequency will affect the battery life and shorten the service life of the meter. |
4:Does the desiccant need to be changed regularly? |
No need. After calculation, we equipped with desiccant metering, can ensure the product life cycle (16 years) moisture absorption effect. |
5:What is the storage density of the data? |
Data can be frozen by minute, hour, day, and month. |
6:Is internal metering data affected after a water meter failure? |
The "triple backup" data storage component is used to store data in three locations: chip (on-chip FRAM), off-chip EEPROM, and off-chip NFC EEPROM to ensure data storage security. If the ultrasonic water meter fails, such as power failure, crash, etc., the data can be read by mobile phone APP or NFC maintenance tool. |
Новинки товаров от производителей по оптовым ценам