Описание и отзывы

Характеристики

foam gap filler

Specification

Product description
PU Foam is a one component isolation and construction foam developed to make a seal between construction parts. The foam cures in response to humidity from air and from building materials. This versatile single component adaptor foam in aerosol cans is a practical solution for craftsmen who prefer to work without a PU Foam gun. Like all types of  foam the product combines excellent insulation characteristics with perfect adhesion on a wide range of substrates such as timber, brick, natural stone, concrete, plaster, metals and most plastics.

Applications
Joints between separation walls, ceiling and floors. Joints around transits of wires and piping through walls and floors. Perimeter joints around window and doorframes.
In general the foam has an excellent adhesion on concrete, brick, stone, plaster, wood, metal and many plastics like polystyrene foam, rigid PU foam and uPVC.

Technical Data

Limitations
Not recommended for locations subject to continuous water immersion and not for filling secluded areas or joints wider than 4 cm. Wider joints and joints deeper then 5 cm are to be filled in multiple layers. Waiting time between applications 15-30 minutes. Before each application lightly spray with water. The foam surface has to be protected from UVlight. Cured foam can only be removed mechanically.

Surface preparation and finishing
Surfaces must be clean and free of grease. Surfaces to be made slightly damp with a flower spray. Shake aerosol 20 times very well before use. Protect eyes and wear gloves and working clothes. Tapestry, floor-covering and furniture to be covered with paper or plastic foil. Fresh foam can be removed directly with Purfoam cleaner, thinner or acetone. After curing the surplus of the foam can be removed with a knife or spatula and the foam surface can be worked off.

Packaging
300, 500, 600 or 750 ml tin aerosols with tube.

We can offer free samples if we have stock in our warehouse,  Besides, OEM services are also available if you need.

And we have perfect after-sales services.

The pioneering work on polyurethanes was conducted by Otto Bayer and his coworkers in 1937 in Germany. Polyurethane foams, including SPF upholstery (flexibile) foams, etc. were developed in the 1950's.

Available colours
white,other on request

Shelf Life and Storage

12 months stored in the original unopened containers between +5°C and +35°C.

Safety
Safety data sheets are available upon request.

Warranty
Sealants warrants that its product complies, within its shelf life, to its specification. The liability shall in no case exceed the amount fixed in our Conditions of Sale. In no event Den Braven Sealants is liable for any incidental or consequential damage.

Liability
All supplied information is the result of our tests and experience and is of general nature. However, they do not imply any liability. It is the responsibility of the user to verify by his own tests if the product is suitable for the application.