Сохранить в закладки 1832816181:
Manufacturers of Permanent magnet(PM) Stepper Motor & PM Synchronous Motor:
1. PM Stepper Motor:
Diameter | 8mm | 10mm | 15mm | 20mm | 25mm | 35mm | 42mm | 55mm |
Model No. | PM8S-020 | PM10S-020 | PM15S-020 | PM20S(L)-020 | PM25S(L)-048(024) | PM35S(L)-048(024) | PM42S(L)-048 | PM55L-048 |
2. PM Stepper Motor with gearbox(with different gear ratio):
Diameter | 10mm | 15mm | 20mm | 24mm | 25mm | 28mm | 35mm | 42mm |
Model No. | PG10S-020 | PG15S-020 | 20BYJ46 | 24BYJ48 | PG25S-048 | 28BYJ48 | 35BYJ46; PG35L-048 | PG42L-048 |
3. PM Linear stepper motor(with lead screw):
Diameter | 8mm | 10mm | 25mm |
Model No. | PL8S-020 | PL10S-020 | PL25S-048(024) |
Application :
HVAC/R Valve Actuation
Office Automation Printers, Copiers, Data storage
Medical Applications Pill dispensing Analysers
Telecommunication Antennae positioning Switching lines
Other Industries & Applications Robotics
Highlights :
Excellent open loop control - No encoders necessary
Digitally controlled - Easy to use with a micro processor
Cost effective - compact design, lower integration cost
Maintenance free - motor is brushless
Winding possibilities – Bipolar
General Specification:
Item | Specification | ||
Step Angle Accuracy | ±8%(full step, no load) | ||
Resistance Tolerance | ±10% | ||
Inductance Tolerance | ±20% | ||
Temperature Rise | 80.C Max.(rated current,2 phase on) | ||
Ambient Temperature | -20.C~+50.C | ||
Insulation Resistance | 100MΩMin. ,500VDC | ||
Dielectric Strength | 600VAC , 1s , 3mA |
Specification:
Model | Step Angle (Deg.) | No. of Phase | Rated Voltage (VDC) | Resistance /Phase(Ω) | Holding Torque (gf.cm) | Max Pull-in Rate(PPS) | Figure |
PM35S-048-248 | 7.5 | 2 | 5 | 20 | 300 | 320 | 1 |
PM35L-048-237 | 7.5 | 4 | 12 | 60 | 450 | 500 | 2 |
PM35L-048-262 | 7.5 | 4 | 5 | 10 | 400 | 350 | 3 |
PM35L-024-251 | 15 | 4 | 5 | 16 | 180 | 200 | 4 |
PM35L-048 | 7.5 | 4 | 12 | 30 | 550 | 400 | 5 |
PM35L-024-246 | 15 | 2 | 24 | 12 | 500 | 6 |
Dimension:
Customization On Call
Coil Modifications - Resistance and Inductance.
Magnets - to yield higher linear force or reduced detent levels.
Higher Strength Plastics for higher impact forces.
Reduced or increased Detent Force to suit the application.
Screw - metric or imperial tips, length.
Special Flanges, Connectors.
Wire Harness - connectors, pins, lead length, shrink tubing.
Examples of our main customers:
Новинки товаров от производителей по оптовым ценам