Промышленный приводной насос для подачи воды DTEC Паровая

1.Impulse steam turbine, Enlarged base, Fast loading structure

2. Packaged oil container

3. Delivery the whole steam turbine without opening the cylinder to minimize the time of on-site installation time

4. High efficiency, Strong working ability, Large power headroom

5. Simple and reliable structure, Sensitive start, Stable le operation.

6. Good performance with variable speed and conditions

7. Rotor and dynamic blade with advanced design technology

8. High speed dynamic balance and the thermal load test  in factory

9.Advanced and reliable control technology

Edith Yang (female)

Tel/Fax: 86-28-68730103

Mobile: 18140118680

Skype: edithyang168

Linkedin: Edith Yang

Address:3-2-608,District 3,No.1700,New Century Global Center, North Section Tianfu Avenue ,Chengdu City, Sichuan Province, China. Zip 610000. 

    Inlet Pressure: 3.6MPa             Inlet Temperature:380 °C   

    Exhaust Back Pressure: 14kPa       Rated Rotating Speed: 4820r/min  

    Rotating Speed Range: 4338~5302    Rated Power: 3.6MW                

    Maximum Power: 4.0MW 

    Inlet Pressure: 3.43MPa                  Inlet Temperature: 435 °C    

    Exhaust Back Pressure: 12kPa             Rated Rotating Speed: 10400r/min    

    Rotating Speed Range: 9000~11000         Rated Power: 4.9MW    

    Maximum Power: 5.4MW

   Inlet Pressure: 3.43MPa                 Inlet Temperature: 435 °C

   Exhaust Back Pressure: 12kPa            Rated Rotating Speed: 7050r/min    

   Rotating Speed Range: 5760~7560         Rated Power: 7.5MW  

   Maximum Power: 8.6MW 

    Inlet Pressure: 1.0MPa                        Inlet Temperature: 380 °C    

    Exhaust Back Pressure: 9kPa                   Rated Rotating Speed: 5200r/min     

    Rotating Speed Range: 3000~6000               Rated Power: 8.5MW

    Maximum Power: 10.0MW

    Exhaust Back Pressure: 11.8kPa      Rated Speed Range: 6200r/min

    Rotating Speed Range: 5500~7000     Rated Power: 10.96MW

    Maximum Power: 12.0MW

     Inlet Temperature: 535 °C          Inlet Pressure: 8.83MPa

     Exhaust Back Pressure: 9kPa         Rated Rotating Speed: 4550r/min          

     Rotating Speed Range: 3000~6000     Rated Power: 16MW                         

     Maximum Power: 25MW

GMB2550r CNC gantry miller is processing runner blade

 CNC coil 12-axis expander imported from France 

Dovetail miller

10m Vertical lathe

A Corner of workshop

Actually, in addition to various steam turbines, we can also provide you with all kinds of steam turbine parts! Please feel free to contact us at any time when you are interested in our products! Thanks!

Spare parts include:

Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealings;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

We, Dongturbo Electric Company Ltd.(DTEC). DTEC is an international corporation, with its headquarter in Chengdu, China, and manufacturing bases in Deyang and Kunming, China, mainly engaged in the manufacturing of power & electric equipments, EPCC (engineering, procurement, construction, commissioning), and export and import business. DTEC also has branches and joint venture in Malaysia, Thailand, and Philippine. Our business scope covers EPC, supply equipment and materials for thermal power inc luding boiler, turbine, generator and their auxiliaries, BOP, electric and C& I etc.; EPC and equipment supply for PV, thermal solar power, Wind & PV hybrid and energy storage system.; spare parts supply and power plant overhaul and maintenance;

We have established close partner relationship with design institute, manufacturers, erection company, traders and end customers both in China and all over the world.

We actively and continuously engaged in the domestic and global electrical markets. Our professional Engineering, Project Management etc. contributed to the success of the contracted projects, meanwhile, we also shared a lot from those success, we became one of the technical expertise for systematic solution for power industry.

We are willing to grow with our customers, and we always believe our success can only rely on the success of our customer. We are always prepared to provide the best solution to our customer, provide the best service to our customer, and make the most gain to our customer.