Нержавеющая термопластичная уличная линия дорожный указатель полосы

Описание и отзывы

Характеристики

JLCRG  Thermoplastic Street Line lane marker

Small driving thermoplastic screeding (convex) road marking machine is screeding general road marking machine, compact and small, flexible to operate. Under the premise of sufficient melted material, it also has relatively high construction efficiency.

This is for flat line, and the type II is for flat line and convex line.

1. Ideal machine for medium-sized and small marking jobs in urban areas and highway.

2. Advanced hydraulic drive with infinitely variable speed control system for precise speed control and adjustment.

3. Moving priority design can be efficiently control machine running to enable the safety in case of emergency.

 4. The screeding structure makes the markings straight and beautiful.

5. Sensitive, precise and stable computer control system easily realize all operations. I:

6. I Small Thermoplastic Road Marking Machine: For flat line II: II Small Thermoplastic Convex Road Marking Machine: For Flat line and Convex line

7. Standard equipped with guide warning screen, pre-marking system and trailer is optional.

JLCRG  Thermoplastic Street Line lane marker

Main Parameters

Note :Type I 1.8-3.0mm(adjustable); Type II bottom line 1.0-2.5mm(adjustable),bump height3-7mm(adjustable)

  JLCRG  Thermoplastic Street Line lane marker

 Line sample

   Our Factory

Packing  of JLCRG Thermoplastic Street Line lane marker .  : Wooden package

Our business scope :

1. Thermoplastic road marking machine

2. Cold paint road marking machine

3. Two component road marking machine

Pre Heater for Driving type  Thermoplastic Street Line lane marker

1) Pre heater and thermoplastic marking machine relationship

Pre-heater, always matched with thermoplastic marking machine, is main equipment for thermoplastic paint lines marking construction.

Pre-heater is used for heating, melting, and stirring thermoplastic marking paints continuously, preparing hot melt paints for the thermoplastic machine during long distance road lines marking work.

2) How to use the pre heater

During the construction, put powder coating (additives) into the pre-heater firstly.

The heating temperature must be controlled between 180 °C ~ 210 °C.

Keep stirring while melting, until the paint into a homogeneous liquid state. And then, the hot-melt material is ready to be discharged into the thermoplastic machine for marking construction.

The melting paint quality affects directly to the traffic lines marking quality, so the pre-heater is a key part during thermoplastic paint road lines construction, and essential device for thermoplastic paints heating and melting.

JILI machinery supply three kind of road marking paint machine according to the paint material :

1. Thermoplastic road marking machine series;

2. Cold paint road marking machine series

3. Two-component road marking machine series

According to different marking ways , the thermoplastic road marking machine can be divided into 3 type:

1. Thermoplastic screeding type

2.Thermoplastic extrusion type

3. Thermoplastic spraying type

The working type could be driving type marking, self propelled type marking or hand push marking .

The thermoplastic road marking equipments needs a set of numerical equipments to compelet the construction .

It is usually including the following parts.

1. Thermoplastic pre heater

2. Road marking machine

3. .Pre-marking machine

4. Primer

The cold paint road marking is different from thermoplastic road marking . It can complete only by one unit road marking machine.

It can be divided into high pressue airless type and low pressure air spray type .

The working type could be driving type marking, self propelled type marking or hand push marking .

We would like to be helpful for your road constricon.

Any question or need, pls contact us