10s 36v 100A BMS PCM для литий ионных литиевых аккумуляторов lipo печатная плата батарея bms электровелосипеда

Сохранить в закладки 1985997988:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики


Products Description

10s 36v 100A BMS PCM for LI-ION lithium lipo battery packs Circuit protection board ebike battery bms

No.Itemstandard
1VoltageCharging voltagelifepo4(3.65V/1cell)
Single section equilibrium voltagelifepo4:3.60V±0.025V
2CurrentSingle section equilibrium current0~200mA(custom)
Single section consumption current (consumable)≤20μA
Maximum continuous discharge current100A   custom
3Overcharge protectedCharging test voltage3.8~4.4V(custom)
Charging detection delay time0.96S—1.4S
Charging recovery voltage3.8~4.4V(custom)
4Overdischarge protecteddischarge detection voltage1.9~3.1V(custom)
discharge detection delay time115—173mS
discharge recovery voltage1.9~3.1V(custom)
5Over-current protectedOver current detection voltage0.6V
Over current detection current120A
Over current detection delay time7.2ms—11ms
recovery modeDisconnect load automatic recovery
6Short circuit protectionDetection stateExternal short circuit
Detection delay time200-500us
recovery modeDisconnect load automatic recovery
7Inside resistanceProtection circuitMOSFET)≤30mΩ
8temperatureOperating temperature range-40~+85°C
Storage temperature range-40~+125°C

bms 10.jpgbms.jpg 

Packaging & Shipping

-5.jpgexpress.jpg 

Our Services

13_conew1.jpg13_conew1.jpg 

FAQ
1. How can i Choose right BMS?
A: Just Pls tell me these questions, then i check the right BMS for you.
1).How much Voltage do you need?
2), what battery are you using? lifepo4 battery/ lithium / polymer;
3), what is your load?
4), what's power of motor and controller?
2.What can i know which battery models i use?
A:Li ion/lithium/polymer battery,single cells full chagred voltage is 4.2v, lifepo4 battery is 3.65v.
3.What's the current of Charge point?
A:Normal is 5A, if you need high,pls tell me.
4.Can i use the chagre/discharge different point BMS as same point BMS?
A: No. Befor you order,pls confirm if your load has charge/discharge same point or different.
5.Why the LED light is on?
A: This is Balance light,when it on,mean your battery begin balanced.
6.Can I customize the size of the BMS?
A:Yes, size can do as client asked.
Certifications

CERTIFICATE.jpg 

why choose US

why choose us.png 


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам