Чернила на водной основе для пластиковой пленки

Описание и отзывы

Характеристики

Water based flexo printing ink for plastic film

20kg per barrel

water based Printing ink 

Print base-matter
LDPE,LLDPE and HDPE film treated (surface tension≥38dyne).
OPP film treated (surface tension≥38dyne).
 Carton and paper products.
Surface treated: cellophane paper, aluminum film-plating, aluminum foil, radium film, rainbow film and pearl film.
Printing viscosity

ink Zahn4 (cup) 30-50s

FINENESS:20,SOLID CONTENT:40%,DRY SPEED,15”,25DEGREE,8-16VM,ODOR:WITHOUT,VISCOSITY:30-40S 

Product Characteristics and usage instructure

1.STORE IN ROOM,SEALED ,5-50 DEGREE TEMPARATURE

SHAKE WELL THE INK BEFORE PRINT,IF USE Circulation pump,CHECK THE INK VISCOSITY BEFORE

2 DIFFERENT PRINTING MACHINE NEED DIFFERENT INK VISCOSITY,BEFORE PRINTING,USE PURITY WATER AND SOFTENING WATER TO ADJUST

3,KEEP THE WATER BASED INK PH STABLE ,ARRANGE FROM 8.5-9.5

4,THE THINNER IS WATER,THE MACHINE MAKE THE INK HAVE BUBBLE,ADD SOME DEFORMING AGENT CAN SOLVE

5,DIFFERENT FACTORY HAS DIFFERENT INK CHARACTER,IF YOU MIX THEM,SHOULD TRY A LITTLE TO WATCH THEIR STABILITY.

6,AFTER PRINTING,USD SPECIAL SEALED CONTAINER TO KEEP THE REMAINING INK,KEEP THE INK STABLE

7,SOME REMAINING INK ,SHOULD WASH AT ONCE,OTHERWISE IT’S DIFFICULT TO WASH,USE SPECIAL CLEANING AGENT TO WASH

8,IF THE PRINTING MACHINE SPEED SLOWLY, WE GIVE YOU SOME SLOWLY DRY AGENT TO SOLVE.

The speed of print and the depth of plate
The printing inks can be widely used to various speed of print with different solvent of print. The speed of print from 30m/minute to 120m/minute, all of inks can be dried completely.

Thinner

Use water to dilute,add transfer agent to make ink dry slow,add alcohol to make ink try fast

Ink composition

Acrylic resin,pigment content:10%-15%,color bright,3%water,3%alcohol

Technical parameters