Сохранить в закладки 60126649634:
KSD306-B High duty 16A Bakelite Manual Reset Bimetal Temperature Switch for eletric water heaters spare parts
The series of KSD306-B that is of double-pole structure falls in the category of manual reset type high current bimetal thermostat. The product series, safety and reliable, is used in high-duty electric water heater for overheating protection. When the instant snap of bimetal disc occurs at certain temperature, two contacts separate promptly by means of mechanical transition and simultaneously two-phase circuit disconnects in order to completely cut off power supply. Pressing reset lever will restore the power supply.(heavy-duty thermostat)
Advantages
Parameters
Use | Overheat protection |
Appliance | Electric water heater(heatertemperature switch) |
Reset type | Manual |
Base material | Resist heat resin base |
Amperage | 16A |
Max. Operating Temperature | 125℃ |
Tolerance | |
Contact material | Silver |
Dielectric | Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) |
Insulation | With a DC 500V megger, borne DC 500V, the tested value is over 10MW. |
Resistance Between | Below 50mW |
Maximum ambient | 185℃ |
Approvals | CQC/TUV |
Terminal type | Customized (Refer to our specification) |
Cover/Bracket | Customized (Refer to our specification) |
Dimension of temperature switch:
Safety certificate
OT range | Life | 250V 16A |
40-125℃ | 10,000 | CQC,TUV |
Major series of snap-action thermostats are as follows:
Series | Diameter of bimetal disc | Max. operating Temp. | Max. | Switch structure
| Service purposes |
rated | |||||
current | |||||
KSD301
| F12.8mm (1/2″) | 280°C
| 16A
| SPST
| Temperature control and overheating protection for low-duty electric heating applications. |
KSD301-U
| F12.8mm (1/2″) | 280°C | 16A
| SPST
| One shot type fuse for low-duty electric heating applications. |
KSD302
| F22.25mm (7/8″) | 125°C | 25A
| SPST
| Temperature control and overheating protection for high-duty electric heating applications. |
KSD303
| F12.8mm (1/2″) | 50°C | 10A | SPST | Defrosting and temperature compensation for refrigerator. |
KSD305
| F22.25mm (7/8″) | ||||
KSD307 | F12.8mm (1/2″) | 220°C | 20A | SPST | PTC power cut out for electric heater, commercial appliance |
KSD309
| F12.8mm (1/2″) | 280°C
| 16A
| SPST
| Temperature control and overheating protection for high temperature heating applications. |
KSD310
| F19mm (3/4″) | 50°C | 35A
| SPST
| Defrosting for big current refrigerator, air conditioner or other commercial cooling appliances |
KSD314
| F19mm (3/4″) | 220°C | 45A
| SPST
| Temperature control and overheating protection for big current heating applications. |
KSD315 | F19mm (3/4″) | 125°C | 16A | DPST | Manual reset for water heater protection |
Temperature switches recommendation:
NOTE: 16A BAKELITE MANUAL RESET BIMETAL TEMPERATURE SWITCH FOR HIGH-DUTY ELECTRIC WATER HEATER CAN BE CUSTOMIZED UNDER YOUR REQUEST. PLEASE REFER TO OUR SPECIFICATION. WELCOME TO OUR WEBSITE TO GET MORE INFORMATION OF TEMPERATURE CUTOFF SWITCH.
( //www.thermostat-gb.com/html/Bimetal_Thermostat/20140624/KSD308_16A_Bakelite_Manual_Thermostat.html )
AWE 2018 - Appliance & Electronics World Expo 2018
Getting more information about high temperature protector and limit switch, please refer to our website: www.thermostat-gb.com
Новинки товаров от производителей по оптовым ценам