Горячая Распродажа самоклеящаяся Асфальтовая/битумная Водонепроницаемая герметизирующая лента алюминиевая мигающая кровля

self adhesive asphalt/ bitumen waterproofing sealing tape, aluminium flashing roofing, construction building material membrane

This products can be used for general flashing applications, sealing glazing bars, sealing leaks in gutters, valleys, down pipes, capping, caravan seams and various corrugated and flat roofs. Also suitable for sealing roof lights and repairs to cracked glass.

a. instant waterproof seal, even in famp conditions. 

b.quick and easy to apply, no specialist tools required.

c.4 layers or protection: lacquer foil, membrane and bitumen adhesive

d.superior temperature resistance from -20℃ to +100℃   -easily moulds to contours. 

e.long lasting protection, at least 15 years

f.available in a wide range of sizes. 

Storage Life: 12 months stored between 5 ℃ and 25℃ in original containers

1. Product description:   

The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the base covered with a release sheet,keep the self-adhesive flexible waterproof. The product has a good self-adhesive and bending properties. 

2. Application: 

Construction is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.

Cut flashing to the required length, remove the release film and press down the adhesive bitumen to the previously prepared surface. 

Ensure full contact by smoothing down with a cloth, taking care to eliminate air bubbles. 

Final rolling down of the edges with a wallpaper roller will ensure a good edge seal. 

All overlaps should be a minimum of 25mm and well rolled down.

Note: In cold weather adhesion will be imporved by storing the roll in a  warm room for 12 hours or more before use, or by gently warming the strip during application.Do not apply below 5 ℃.

Product profile:

HUIYUAN Self-adhesive flashing tape is a modified bitumen waterproof membrane which use SBS rubber as basic material,PET film/PE film/Aluminum foil film as upper surface material.Isolation layer as down surface material.

Product specification and kinds:

Product features:

1)Don't need fire,donlt need adhesve glue,environment-friendly;

2)Excellent adhesive property.it can make waterproof layer be a whole body;

3)High elongation;

4)Good low temperature flexility property.

Use scope:

1)Non-exposed roof,underground project waterproof;

2)Water channel,swimming pond;

3)matro project;

4)Very suitable for waterproof project which can not use fire;

5)Very suitable for cold area for it's good low temperature property.

Product Kind:

- Single self-adhesive waterproof membrane with PE film;

- Single self-adhesive waterproof membrane with aluminum foil film;

- Double self-adhesive waterproof membrane;

Product Spec:

1.Available thickness:1.0mm 1.2mm 1.5mm 2.0mm

width:50mm,75mm,100mm,150mm,200mm,250mm,300mm,500mm

length:2.5m,3.0m,5.0m,10m,20m,25m

Storage:

Store the rolls horizontally between +5°C and 25°C in dry conditions in original packing.

Shelf-life approximately 12 months

Use scope:

-Non-exposed roof,underground project;

-Channel,swimming pool;

-metro project;

-Some project which can not be used fire;

-It's anti-cold property is very suitable for cold area.

Package: Carton