Пена с распылителем для изоляции стен и крыш полимерный Изоцианат MDI смесь полиола mdi

Описание и отзывы

Характеристики

MDI  isocyanate and PPG polyol /wholesale polyurethane foam insulation spray for wall and roof   

specifications:

It applies to all kinds of thermal insulation engineering which use the spray, such as storage warehouse, large pots, large-scale pipelines and construction roof and all types of abnormal thermal insulation projects.

MIC-500™ MOBILE INSULATION SYSTEM FOR CELLULOSE SPECIFICATIONS

 PRODUCT

Spray applied cellulose fiber insulation in combination with a viscous,

water reducible, clear adhesive to achieve a closed cavity.

Relatively heavy textured thermal and acoustic material typically installed

from 1.9cm to 15.2cm, depending on the project requirements.

The fiber is produced from high quality recycled paper from various sources

which may vary slightly in color. Care must be exercised to ensure a uniform

mixture of material.

COLOR

Standard color is beige. Multiple colors available.

THERMAL RATING

Resistance Factor of 4.6 per inch of application (R value is F0.hr.ft2/Btu).

THERMAL BARRIER

Flame retardant insulation has a Class 1, Class A flame spread rating per

ASTM E-84, UL-723, NFPA-255 and UBC-42. Underwriter's Laboratories

reference number # R5499.

TYPICAL INGREDIENTS

Cellulose- recycled paper and cardboard, flame retardant additives, multiple

colors, component adhesive, boric acid treated for pest and rodent control.

Adhesive Binder- Concentrated, viscous, water reducible, clear, component

adhesive comprised of Vinyl Acetate, Ethylene Copolymer, Methanol Alcohol

(contains not carcinogens). Used in different mixture ratios for standard

(up to 7.5 cm) and high build(7-15 cm) insulation applications..

MIC-550™ MOBILE SURFACE SEAL FOR CELLULOSE MATERIAL SPECIFICATIONS

PRODUCT

Durable water based surface seal coating designed to be spray applied over

cellulose insulation or a fifi brous, porous surface.

NRC rating shall be .55 or greater per ASTM C-423 when applied over 4.5cm of cellulose spray-on insulation.

Abrasion resistant, paintable.

Applied in a heavy or light coat between 1/16- 1/8 inches thick (2-4 mm

thick).

THERMAL BARRIER

Protective Coating shall have a Class 1 rating and a flame spread rating not

to exceed 5 when tested in accordance with ASTM E-84

COLOR

Standard color is white to off-white. Multiple colors available.

TYPICAL INGREDIENTS

Water, Calcium Carbonate, Vinyl Acrylic, Cellulose Fibers, Methocel, Boric

Acid, Defoamer, Titanium Dioxide, Bentonite.

MIC-660™ MOBILE INSULATION SYSTEM FOR URETHANE MATERIAL SPECIFICATIONS

PRODUCT

Polymer based, plural component, closed cell, rigid foam insulation system.

2 lbs core density (2 lbs per cubic foot, 32 kg per cubic meter).

Spray applied with a ratio of 1:1 by volume using the H20/35 variable

pressure-proportioning unit.

COLOR

Standard color is yellow. Multiple colors available.

THERMAL RATING

Resistance Factor of 7 per inch of application (R value is F0.hr.ft2/Btu).

COMPRESSIVE STRENGTH

28 lbs per in2 (19687kg m2).

WATER RESISTANCE

AATCC 127-1995 Suter Hydrostatic Pressure resistance test, no failure.

AIR LEAKAGE

ASTM E 285-91, 0.0 cubic feet per minute/ft2.

WEIGHT

Component A-Activator 10.3 lbs per gallon (1.24kg per liter).

Component R-Resin 9.7 lbs per gallon (1.16kg per liter).

THERMAL BARRIER

Requires a 15-minute thermal barrier apllied over top in occupied spaces.

Polyurethane is not to exceed a flame spread rating of 20 in accordance

with ASTM E-84.

DISCLAIMER

A fresh air hood system is required to prevent dangerous inhalation health

issues.