Гигантский надувной слон на заказ большие надувные животные

 Specification of  Inflatable Elephant

More Product from Our Company

 1.How to take care of your cartoon balloon:

Never fly your balloon on bad weather conditions. If the wind is above 20 miles per hour or if it's raining, bring your cube down or deflate and store.

2.How maintain and store your helium cartoon:

With proper care, handling, your inflatable should serve you well for an indefinite period. To clean, use warm water with mild detergent and a soft cloth. Dry it completely using another soft cloth. If the inflatable is not going to be used for several days, make sure that it’s clean and dry before storing in protective bag.

3.How to inflatable the helium balloon:

1)Check to make sure the tether line harness is not tangled and the lines are tied securely to the inflatable.

2)Attach one end of the tether lien to the metal harness ring on the underside of the balloon. Only one tether line is required. Do not attaché other lines to any other part of the balloon as it will put undue stress on the fabric and cause the balloon to tear.

3)Before inflating the balloon secure the tether line to a heavy, secure object. An assistant at this point would be helpful.

4)Screw the metal inflation hose adapter tightly into the valve of the helium tank.

5)Insert the inflation hose about 12 inches into the valve on the underside of the inflatable filling valve by unscrewing the second section of valve and hold it firmly.

6)Turn the helium tank valve on VERY SLOWLY.  High pressure at the beginning could rupture the inflatable and cause the hose to whiplash. As the inflatable starts to unfold and the pressure inside the tank starts to diminish, you may then open the valve more. If the hose starts to ice, reduce the flow of helium.

7)Inflate until wrinkles disappear from the hull of the inflatable and its just firm, do not over inflate. Remember that helium will expand and contract in hot or cold weather.

8)Turn the helium tank off.

9)Remove the inflation hose from the inflatable valve being careful not to let any helium escape.

10)Close the valve on the inflatable.

11)Raise the inflatable slowly to the height desired and tie it securely at that point. As you let the inflatable rise, check the tether line to make sure there are no weak or frayed areas.

Dear Customers.If You Have Any Questions,Pls contact me.Thank you!