1. Is CIRCLE FLAMER X-F3600 can work by placed on ground?Yes, CIRCLE FLAMER X-F3600 flame projector with two modes, half cycle mode and full cycle mode. when working with full circle mode we suggest the machine hanging on the truss so that the nozzle can runing full cycles. For half cycle mode it can wave 210 degrees, it can be put on ground.
2. What is the safety distance for CIRCLE FLAMER?
The flame output max. is about 10m, for all projection directions, please keep a minimum 15m away from the machine. from front and rear side of machine, minimum keep 5m.
3. What is the fuel for CIRCLE FLAMER?
The fuels suitable for CIRCLE FLAMER are ISOPAR, which we have test in factory including ISOPAR G, H, L, M, other ISOPAR types it may can also be used on CIRCLE FLAMER, but we not get the sample, so not test it. Besides, it can also use ISOPROPANOL.
4. Can CIRCLE FLAMER use BIO-Ethanol?
The machine itself can burn bioethanol, but please do make sure there is no water inside the fuel. otherwise the water will cause damage to the pumps after long time use. while in the market there are lot of bioethanol which contains water in it. that is why normally we not suggest customer use bioehtanol on CIRCLE FLAMER.
5. Can CIRCLE FLAMER generate colored flames?
Normally colored flame liquid use bioethanol as fuel and put some chemicals in it. While SHOWVEN not offer this types of fuels.
Theoretically, circle flamer can use bioethanol as fuel (please make sure no water contains in the fuel), but due to different color use different chemical or different manufacturer use different chemicals. And in most cases, those chemicals will do some harm to the jose or pumping system. So if customer want to use those color flame liquid please do test it on CIRCLE FLAMER first.
Important notice: whatever color flame liquid you use, please do remember to flush the pumps and tubes with pure bioethnol (if the colored fuel is bioethanol) immediately after the show.