Сохранить в закладки 60807476164:
Introduction
HDMI Over Ethernet is based on TCP/IP standard. It transmit your HD display with the high resolutions up to 200 meters away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard, you can extend your HD video to multiple displays by using an Ethernet Switch, providing greater flexibility and options when integrating several home theater components.



Features:
.Support point-to-point mode, one point-to-many mode and connection mode
. Support IR extender function allows IR remot control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.
. Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
. No loss of quality
. Installs in minutes
. Need DC5V/1A power supply for each box
Operating and Connecting:
1.Connect one HDMI cable between source device and TX Extender
2.Connect one HDMI cable between sink device and RX Extender
3.Connect Single cat-5e or cat-6(recommended) cables up to 200 meters instead of HDMI cables between TX and RX Extender
4.Connect 5V power supply to the Extender
SPECIFICATIONS:
Length of CAT-6 cable between Rx and TX | Up to 200 metres |
HDMI Resolutions | 480p,720p,1081p |
Audio | Sample rate: 32kHZ, 44.1kHZ and 48kHZ |
IR remote control | 38KHZ; NEC |
HDMI | HDMI 1.3 |
Max bandwidth | 225MHz |
Max baud rate | 6.75Gbps |
Input Video signal | 0.5~1.5Volts p-p |
Output DDC signal | 5Volts p-p (TT1L) |
Input/Output HDMI1.3 cable distance | <=20m AWG26 HDMI 1.3 standard cable |
Power consumption | HDMI Sender: 3W HDMI Receiver: 3W |
Power adapter format | Input:AC (50HZ~60HZ) 100V-240V; Output: DC5V/1A |
Operating Temperature range | (0 to +45 Centigrade) |
Operating Humidity range | 10 to 80%RH (No Condensation) |
Dimension (L x W x H) | 163*87*24mm |
Weight | 474g*2PCS |
Support one to many:


Новинки товаров от производителей по оптовым ценам