Высокочувствительный беспроводной рыболовный сигнализатор клева с инфракрасным датчиком движения

Bite alarm units

*8 tones settings
*8 volume settings
*5 sensitivity settings
*15 sec latching LED
*5 colors clear LED choices
*Running LED (all are white)
*Push button LED dimmer
*Black satin smooth finish
*Colorful light rollers
*150-200 meters
*Operates with the 1.5V * 3 batteries
*2.5mm jack socket
*Memory function in bite alarm
*Height adjustable/removable storm ears
*Low battery function 

 Alarms User Instructions

Inserting battery
Undo single battery locking screw --- slide down battery cover --- insert 1.5V * battery
To complete the procedure, gently push back the battery cover ,
and tighten up the locking screw .
Power on/off switch
Push the switch to right "Power ON",
push the switch back left position "Power OFF"
Volume adjustment
Press the volume control "V"to step through the 8 volume settings ,
ranging from low to high and silent mode .
Tone adjustment
Press the tone adjustment button "T" to step through the 8 settings .
On/Off Light switch
Press the light control "L" to set ON/OFF night light .
Sensitivity adjustment
Press the sensitivity adjustment button "S" to step the 5 sensitivity settings , ranging from Minimum to Maximum mode.
1 beep equals maximum sensitivity to 5 beeps minimum sensitivity .
Run indication / Low battery indication
When magnet roller wheel is activated . Both LED's will be illuminated . The latching LED will illuminate for 20 seconds
and the run LED illumination stops when the roller wheel finishes rotating ./ Run LED on bite alarm will flash /blink once
every 5 seconds when battery low .

Receiver units

*8 tones settings
*8 volume settings
*5 colors clear LED choices
*Vibration mode/Silent mode
*5 LED dimmer
*150-200 meters
*Memory function in receiver
*Learn and erase code
*Low battery function
*Operate with 1.5V * 3 batteries

Receiver User Instructions 

Inserting battery
Undo single battery locking screw --- slide down battery cover --- insert 1.5V * battery
To complete the procedure, gently push back the battery cover ,
and tighten up the locking screw .
Power on/off switch
Push the switch to right "Power ON",
push the switch back left position "Power OFF"
Volume adjustment
Press the volume control "V"to step through the 8 volume settings ,
ranging from low to high and silent mode .
Tone adjustment
Press the tone adjustment button "T" to step through the 8 settings .
On/Off Light switch
Press the light control "L" to set ON/OFF Bright Latching LED's .
Vibration adjustment
Press the vibration button "O"to choose vibration mode on or off.
Low battery indication
The first latch LED on remote receiver will flash/blink once every 5 seconds when battery is low .

Infrared Motion Sensor

\t8 music settings
\t4 volume settings
\tShutdown current : 20-40 uA
\tStandby current : 50 uA
\tSense angle : 120°
\tWorking current: minimum sound 4-7 mA ;
                                   maximum sound 15-70 mA
\tInfrared horizontal sensing distance : 6 m
\tInfrared vertical sensing distance : 2m
\tContacting power : 15 dbm

Learning code of RF698 & Infrared Motion Sensor: Press the V&L buttons of RF698 for 2s, sounds one time, and press receiver's L button to choose LED light, then press the Sensor's volume button, RF698 will sound again and sensor play a music at the same time, that means learning successfully. When you need to learn other sensor, repeat the above operation.

Erase code of RF698 & Infrared Motion Sensor : Press the V&L buttons of RF698, sound one time, continue hold down the buttons, sounds again, erasing successfully, and all codes are erased.

How to learn ?
Press the V button and hold down L button 2s , sounds one time , then enter the learning , the receiver receive a signal while rotate the roller wheel of bite alarm , it will sounds again , that means learning successfully . When you need to learn other bite alarm , repeat the above operation .
How to erase ?
Press the V button and hold down L button 2s , sounds one time , then enter the learning , but continue hold down the buttons more than 6s , sounds again , erasing successfully , and all code of bite alarm which had been stored are erased.

Basic Information