DN100 промышленный электромагнитный расходомер цена

Сохранить в закладки 62117169743:


Цена:550,00 $ - 600,00 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики


DN100 industry electro magnetic flow meter price 

 

JC090.gif

   

  • DN100 Electromagnetic flow meter is suitable for all liquid flow test of conductivity of greater than 5. Conductivity change does not affect the performance of the change.
  • Convenient operation, the flow meter is set automatically according to the scope of 0 ~ 10 m/s, without change of measuring range.
  • Using the world's most excellent integrated circuit to eliminate the influence of excitation switch and using compensation method of excitation current, finally up to the optimal stability of the product.
  • The flow meter has the long-term high accuracy of measurement. It actually is not affected by fluid physical properties. Measurement accuracy can be up to 1%.
  • The flow meter is with no mechanical and moving parts, usually without maintenance.

 

Technical parameter  

 

Suitable Diameter

DN10~DN2600 (below DN25 non-standard,which should be customized)

Electrodes Materials

316L (stainless steel), Hastelloy C, Hastelloy B, Titanium, Tantalum

Suitable Fluid

Liquid with conductive ratio more than 5 μs/cm

Measuring Range

0.1~10m/s (extendable to 15m/s)

Upper Limit of Span

0.5~10m/s. 1~5m/s recommended

Accuracy

0.3%, 0.5%,1.0%

Output Signals

4~20mADC, load<= 750ohm, 0~3kHz, 5V with source and changeable width.

high terminal and effective frequency output , RS485 interface

Operation Pressure

1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special)

Fluid Temperature

-20C~80C, 80C~130C,130C~180C Depending on Lining Material

Ambient Temperature

Sensor -40C~80C. transducer -15C~50C

Ambient Humidity

<= 85%RH (at 20C)

Cable Outlet Size

M20(16) ×1.5,1/2”NPT

Power Supply

220VAC±10%, 50Hz±1Hz, 24VDC±10%

Power Consumption

<=8W

Protection Ratings

Integral type: IP65. remote type: sensor IP68,transducer IP65

Materials of Liner

PTFE, soft rubber, hard rubber, PFA, etc

Process Connection

Flange :ANSI , DIN , JIS ,ISO ,GB standard

Thread :NPT ,BSP ,G

Tri-clamp connection

Earthing Materials

316L (stainless steel), HC, Ti, Ta, Cu

Housing Material

Carbon steel , 304SS , 316SS

01_07.jpg01_08.jpg01_09.jpg01_10.jpg

-2.jpg

01_13.jpg

01_18.jpg01_16.jpg01_17.jpg01_20.jpg01_21.jpg

FAQ

Q:How long will you get our reply?

A: We will contact you as soon as possible but within 12 hours.Whatsapp:+86-15052699328, www.bcstgroup.com.
Q:Could I get samples?
A:Yes, samples are available. 
Q: What certificates do we have ?
A:We have the certification of ISO,CE and SGS etc.,we could send them to you by email.
Q:How is the price?
A:As we believe the quality is the most important,we will provide the best quality  with moderate price.
Q:Could you provide me the shortest lead time?
A:We have inventory for standard models. Pls tell me your detailed requirements, we will send to you as early as we can. 
Q:Could I visit your factory?
A:Welcome! our factory is located in Jinhu, Jiangsu province, China.
Q: How soon can you arrange the production?
A: Once getting your product confirmation and receiving your payment, we will arrange the production immediately. 

Q: What are your brand names for international market?
A: BCST is the brand for our international marketing. 


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам