Сохранить в закладки 62187876287:
The wheelchair platform lift consists of a body tower, an upper landing gate, a platform mounted gate, a hydraulic drive system and panel controls. Suitable for indoor and outdoor use.
• Covered with Powder-painting steel or stainless steel.
• Emergency down incase of power failure.
• Control panel & Safety door on second floor.
• Safety sensor on bottom of platform, lift will automatic stops once it meet obstacle.
• Emergency stop: lifting and lowering process can be stopped immediately.
Platform size | 1370mm(L) x 900mm(W) | |
Max Platform Height | 6500mm | |
Speed | 60mm/s | |
Load capacity | 300KG | |
Operate voltage | 24V | |
Power Output | 2.2KW | |
Power Input | 220V/50HZ (or customized for local power supply) | |
Drive System | Hydraulic / Screw | |
Control Mode | Inching Switch or Automatic | |
Drive Control | Self-resetting system | |
Overload | Protection Over current relay | |
Material of Platform | Steel or stainless steel | |
Painting | Plastic electrostatic spraying | |
Working Condition | Both indoors and outdoors | |
Working temperature | From -10°~60°C | |
Installation
| Non-pit installation, directly fixed to concrete floor (the concrete floor below the platform shall not be lower than the ground) | |
Control Device
| Calling column (installed beside lift) and remote controller(optional configuration) | |
Emergency Stop
| The lifting and lowering process can be stopped immediately by pressing the emergency stop button. | |
Safety device | Safety Interlock | Lock the platform when it is out of control |
| Emergency down | Can be lowered to ground if power failure. |
Note : All following photo are taken from our own real lift, not download from Internent.
We have confidence to show you our quality and details.
Новинки товаров от производителей по оптовым ценам