Мини uitrasonic дезинфекционный шкаф из нержавеющей стали коммерческого или домашнего продукта

Сохранить в закладки 62263210334:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики


Product Description
Product Features 
1. The inner pot adopts grade teflon coating material, which is effective in anti-sticking. 
2.The three sides of the fuselage are made of heat-resistant tempered glass, which is safe and sanitary, with good light transmittance.               
3. The door is made of Polymethyl Methacrylate material, which is cract-proof, strong toughness and hard to crack due to bending and deformation.                
4. High-power heating pipe, fast heating, built-in temperature limit to prevent coke.
Detailed Images
Instructions for popcorn machine
1. Press the heat preservation lighting switch, heat preservation heating pipe and heat preservation lighting bulb to start working.
2. Twist and rotate the heating switch to preheat the exploding rice plate for 5-7 minutes. Try putting 3 grains of corn and 5 grams of cooking oil into the plate.
3. Put 50ml of oil first, then 100g of corn and 60g of sugar into the pan for threshing. When the corn bursts and there is almost no crack (about 5 minutes), open the lid of the pot and pour it out.
4. Please pay attention to the threshing situation to prevent burning.At the same time, the movable door is closed, and the explosion-proof good explosion-proof corn falls out of the box. Stir the corn until the explosion-proof is completed.
5. Avoid oil dripping to the rim of the bursting rice plate, to prevent the dirty edge of the plate and overheating.
Troubleshooting
1. Turn on the power switch, whether the equipment short-circuit fuse is broken or not.
2. Open the heating switch, the body of the pot is not hot, the heating indicator does not light, and the safety is broken. Please check the wiring failure of the heater inside the pot, the temperature controller fails, and the wiring short circuit of the furnace plate.
3, the temperature indicator does not extinguish for a long time, the temperature is too high, check the thermal temperature controller failure, should re-adjust the thermal temperature controller Angle control at 180±10℃ or replace the thermal temperature controller.
4. If the light doesn't work after the constant temperature switch is working, replace the bulb. If there is no temperature of the thermostat, check whether the bottom plate thermostat is short-circuit or not.
5. If the metal sensor surface is too large, please check whether there is a good grounding device.

Popcorn machine cleaning and maintenance
1. Cut off the power supply during cleaning and maintenance, and unplug the plug to prevent accidents.
2. Clean the surface of the fuselage with semi-dry and wet towels without corrosive cleaning. It is strictly forbidden to wash the rice blasting tray and the whole machine with water directly, otherwise water will permeate into the machine and damage the electrical performance and affect the normal work of the product.
3. It is not allowed to use metal hard objects to wash the inside and outside of the rice blasting machine plate, so as to avoid damage to the non-stick coating in the plate.
4. When the device is out of use for a long time, the plug shall be unplugged and the power shall be cut off for proper safekeeping.
Packing & Delivery

we will pack it in the wooden carton ,then send out from Guangzhou


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам