Высококачественная медицинская машина для отбеливания зубов салона красоты и стоматологической клиники

Описание и отзывы

Характеристики

High quality medical teeth whitening machine for beauty salon and dental clinic/teeth whitening powder

1> teeth whitening machine specification

Description

1,Multifunctional system: Halogen-powered whitening accelerator and LED curing light

2,The most powerful halogen light output available, clinically proven to provide superior resluts to LEDS

3, Dual-arch whitening features gental, normal, and intense light-output settings for the prefect treatment setting with each individual patient

4,Single-tooth whitening option included for precision, tailored treatment results.

5,Bulit-in, Powerful LED curing light, dual wavelength output cures any dental composite on the market.

6, Touch user interface control panel for intuitive programming and treatment tailoring

7, Wireless remote control features patient call button and emergency pause and resume cottons

8,Advanced temperature montior and cooling system prevent system from overheating.

9, Radial arm with 360 range of motion

10, Lamp head is flexible for improved positoning.

Dual-Arch (Power) Whitening Treatment

1. Ask the patient to take a seat in the treatment chair and recline the seat back to a 40° angle.

2. Place the protective eye goggles on the patient.

3. Use polishing sand to polish and clean the teeth before the treatment. Add water as necessary.

. Ask the patient to rinse his or her mouth.

5. Apply lip protection cream and insert the RUNDA Cheek Retractor with the tongue guard pointing down.

6. Stretch the face protection cloth around the outer rims of the cheek retractor and fold the top down under the arms of the cheek retractor.

7. Insert cotton rolls on either side of the buccal frenum.

8. Use compressed air to dry the surface of the teeth and gingiva. Holding the syringe at a 45° angle to the tooth surface along the gingival margin, apply a 2-3 mm layer of RUNDA Gingival Protection along the gingival margin.

9. Apply extra lip protection along the inside of the upper and lower lips.

10. Remove the LED Curing Light from the back of the machine and hold the LED Curing Light 0.5-1 cm away from the gingiva. Press the button on the LED Curing Light to begin curing. Move the device in a circular motion over the gingival area and light cure the gingival protection for twenty-thirty seconds (about two-three seconds per tooth). Use a dental probe tool to check that the gingival protection is fully cured. DO NOT over-cure the gingival protection.

11. Remove the whitening gel syringe and tip from the vacuum-sealed foil wrapper. Attach the mixing tip to the dual-barrel syringe of whitening gel.

12. Apply a 2-3 mm layer of RUNDA II Advanced Formula Whitening Gel to the dry surface of the teeth.

13. Raise the lamp arm and position the lamp head as close as possible to the surface of the teeth, with the lamp head at a 90° angle to the teeth.

14. Once the lamp head is positioned, press the START button to begin the first cycle.

15. Remind the patient that it is safe to swallow his or her saliva during the treatment.

16. Give the patient the remote control. Instruct the patient that the remote control has PAUSE and RESUME buttons to control the light if he or she needs to stop the treatment any time. A CALL button is also included in case the dentist needs to leave the room during the treatment.

17. Provide the patient with music or entertainment during the treatment.

18. At the end of the first cycle, the light will turn off automatically. Use suction to remove the whitening gel. DO NOT rinse with water. Repeat the gel and light application steps two more times for a total of three treatment cycles.

19. After the final cycle, suction off the whitening gel, remove the gingival protection, cotton rolls, face protection cloth, cheek retractor, and protective eye goggles and ask the patient to rinse his or her mouth with water.IMPORTANT POINTS TO NOTE Pregnant women or persons under the age of sixteen are not recommended to undergo the procedure.Terminate the whitening procedure if any patient reports severe tooth sensitivity and remove all whitening gel before treating with fluoride. Within the twenty-four hours after the procedure, patients should avoid colored food and drinks. Use of tobacco products should be limited.

• David (manager Sales)


• Shenzhen Runda Medical Beauty Equipment Manufacturer.

• Add :    2/F, No.8 Sanlian Road, Longhua Industry,Shenzhen P.R .China 518109


• Whatsapp :     0086-13709660027


• Fax :    0757-82222506


• Website : https://rundamedical.en.alibaba.com


• Skype :  yonghui612188