Горизонтальный Центробежный Насос Shandong Zhongrong Fuxing ISW насос для бустера трубопровода

Сохранить в закладки 62318793785:


Цена:106 036,00 ₽*

Количество:

  • В избранное

Описание и отзывы

Характеристики













1、 Overview of ISW horizontal pipeline pump products:

ISW type horizontal pipeline pump is designed by using hydraulic model and performance parameters of is centrifugal pump on the basis of general horizontal pump. At the same time, according to the different operating temperature and medium, the suitable hot water pump, high temperature pump, corrosive chemical pump and oil pump are dispatched on the basis of ISW type. ISW single stage single suction horizontal pipeline centrifugal pump has the advantages of energy saving, low noise and good performance.

2、 Model significance of ISW horizontal pipeline pump


3、 Features of ISW horizontal pipeline pump:

1. ISW type horizontal pipeline pump is of horizontal structure, with the same inlet and outlet diameters, one machine and pump, compact and beautiful appearance, small floor area and low construction investment. If equipped with protective cover, it can be used outdoors.
2. The impeller of ISW type horizontal pipeline pump is directly installed on the lengthened shaft of the motor, with short axial size and compact structure. The reasonable allocation of pump and motor bearing can effectively balance the radial and axial load generated by pump operation, so as to make the pump run smoothly, with low vibration and low noise.

4、 ISW horizontal pipeline pump is mainly used for:

1. ISW type horizontal pipeline pump is used for conveying clear water and other liquids with physical and chemical properties similar to clear water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire-fighting pressurization, long-distance transportation, heating and ventilation refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching, and the service temperature is T < 80 ℃.
2. Ihw type horizontal pipeline chemical pump is used to transport liquid with no solid particles, corrosive and viscosity similar to water
The operating temperature is 20 ℃ ~ + 120 ℃ in metallurgy, electric power, papermaking, food pharmacy and synthetic fiber.
3. Iswb horizontal pipeline oil pump is used to transport gasoline, kerosene, diesel oil and other petroleum products. The temperature of the transported medium is - 20 ℃ ~ + 120 ℃.






















1.The water pump doesn't come out
(1)The inlet valve is not opened, the inlet and outlet pipeline is blocked, and the runner impeller is blocked
(2)The running direction of the motor is wrong, and the speed of the motor is slow due to lack of phase
(3)Air leakage of suction pipe
(4)The suction pump is not filled with liquid and there is air in the pump chamber
(5)The inlet water supply is insufficient, the suction head is too high, and the bottom valve leaks
(6)The pipeline resistance is too large and the pump selection is improper

(1)Check and remove the blockage
(2)Adjust the motor direction and tighten the motor wiring
(3)Tighten all sealing surfaces to eliminate air leakage
(4)Fill with liquid and open vent valve to exhaust air
(5)Shut down, check and adjust (this phenomenon is easy to occur in grid connected water pipe or with suction head)
(6)Reduce the pipeline bend, re select the pump


2.Insufficient pump flow
(1)First check by reason 1
(2)The impeller of pump channel and pump passage is blocked, scale deposit and valve opening is insufficient
(3)The voltage is low
(4)Impeller wear
(1)Press 1 to exclude
(2)Remove the blockage and readjust the valve opening
(3)Voltage stabilization
(4)Replace impeller


3.Excessive power
(1)Use in excess of rated flow
(2)Suction head too high
(3)Pump bearing wear
(1)Adjust the flow and close the outlet valve
(2)reduce
(3)Replace the bearing


4.Noise and vibration
(1)Unstable pipeline support
(2)Liquid mixed with gas
(3)Cavitation is produced
(4)Overload heating operation of motor
(1)Secure the piping
(2)Increase suction pressure and exhaust
(3)Reduce the vacuum
(4)Replace the bearing
(5)Adjust by pressing 5


5.Motor heating
(1)Excessive flow, overload operation
(2)Rubbing
(3)Motor bearing damaged
(4)Insufficient voltage
(1)Turn down the outlet valve
(2)Check and eliminate
(3)Replace the bearing
(4)Voltage stabilization


6.Water pump leaking
(1)Mechanical seal wear
(2)There are sand holes or cracks in the pump body
(3)Uneven sealing surface
(4)Loose mounting bolts
(1)replace
(2)Welding repair or replacement
(3)Trimming
(4)Fastening








1、 Product name and model: ① caliber, ② head, ③ motor power, ④ flow rate, ⑤ speed, voltage, suction lift, and medium, whether with accessories, so that we can correctly select the type for you.

2、 If our company's product model has been selected by the design unit, please send it to our company for purchase directly.

3、 When the use environment is very important or complex, please provide design drawings and detailed parameters as far as possible, and our company's technology will check for you.




Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам