Сохранить в закладки 62470781590:
Operation method |
1. First plug the sauna into the socket, and the power indicator on the panel is on. 2. Turn on the panel key, the heating indicator light is on, the interior and exterior lights are on, the sauna room starts to work, and control the interior and exterior lights respectively when the interior or exterior lights are on. 3. Press the temperature key to set the temperature and set the temperature you need. After 5 seconds, the temperature display window will stop flashing and the current temperature in the room will be displayed. 4. Press the time key to set the time, adjust and set the time you need. After 5 seconds, the time display window stops flashing, and the current set time will be displayed. 5. Then press "+" or "-" of the temperature control frame clock at the same time, the temperature will be converted into "Fahrenheit and Celsius". 6. When the opening temperature and time of the sauna are set, you can use it when the temperature rises to the temperature you need. When the time is displayed as 00, the buzzer will alarm, the instrument will stop heating, and the panel has the function of setting memory, so it is unnecessary to repeat the setting next time the machine is started. 7. If you feel too hot, you can open the exhaust window at the top for ventilation. 8. Turn off the switch of the steam room after use |
Precautions | 1. Check whether the load and voltage of the line and socket meet the requirements of the instrument. 2. The temperature control and time control of the sauna room should select the appropriate temperature and time according to the specific situation of each person, and the time should not exceed 30 minutes, and the temperature should be 40 ℃ ~ 60 ℃. 3. In order to keep water in the body, drink a glass of water before entering the sauna room. 4. It is recommended to take a bath in a short time after sauna, because the pores have not been closed yet. At this time, water pouring will affect the natural opening and closing function of the pores, which is not good for the skin for a long time. 5. The instrument shall be shut down for 1 hour after continuous operation for 4 hours |
YOU MAY AlSO LIKE
![]() | ![]() |
![]() | ![]() |
Новинки товаров от производителей по оптовым ценам