Защита от пыли сжатие и ударопрочность без запаха эпоксидная смола напольное покрытие краска

Сохранить в закладки 62535648096:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики


Products Description
JD-1000.
Description of the epoxy resin flooring paintings:

JD1000 Epoxy Resin floor coating is a two-component solvent polyester finish. It can be applied in the cold and moist environment,
especially in the wet and humid areas. The coating is hard and wear-resistant. Large range of colors is available for the
customer’s reference and it is applicable to the floor in the light industrial workshop, warehouse, etc.
JD-D10 High-solid Primer is two-component solvent epoxy resin flooring paint/coating. It has good penetration and sealing power on
the porous matrix such as concrete and water whetsone, etc. It can reinforce the substrate strength and provide good adhesion.
It is an all-purpose primer for epoxy series paints that can be applied on the surface of concrete, water whetsone, etc. Added
into arenaceous quartz or amorphous silica, it can be also used as the undercoat.

Advantages of the epoxy resin flooring paintings:
1. Beautiful, seamless, dustproof and easy to clean.
2. Have good bonding with the solid base, small shrinkage with good abrasion resistance and durability.
3. Have good corrosion-resistance to the general chemicals.
4. Nice appearance, rapid construction and economy
5. Applicable to the moderate load.
Feature & Application
Where to Use:
It is mainly used for concrete surface where has compression & wearing resistance and anti-dust and corrosion requirement, such as Car Parking,ndustry workshop, office, warehouse, foodstuff factory etc.

Application instructions:


Surface preparation



Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles,oil,grease,and other contaminants.



Primer



Prepare a barrel, pour JD-D10A and JD-D10B in it based on 1:1. Stir the mixture well and then apply it with roller or trowel. The reference consumption is 0.15kg/m².The main purpose of this primer is to seal the substrate completely and avoid air-bubbles in the body coat. A second coat may be required depending on the oil absorption condition of substrate. The recoat time is about 8 hours.



Inspection standard for the primer: even film with certain brightness.

Undercoat


Mix WTP-MA and WTP-MB based on 5:1 first, then add quartz powder (1/2 of the mixture of A and B) into the mixture, stir it well and apply with trowel. The consumption quantity of A and B is 0.5kg /sqm. You can do it one coat at one time or two coats at two times. In the second case, the application interval is about 8 hours at 25 degrees. Sand the first layer, clean it and then apply the second layer. After the whole application, wait another 8 hours, grind it, clean the sanding dust and then continue the next procedure.

Inspection standard for the undercoat: Non-sticky to hand, no softening, no nail print if you scratch the surface.


Top coat



Mix JD-2000A and JD-2000 B based on 5:1 and then apply the mixture with spatula. The consumption quantity is 1.0kg/sqm.



Maintenance



5-7 days. Don’t put the floor into use or wash it with water or other chemicals.

Project case
Company Profile
Our Advantages
Certifications
FAQ

1.How can you prove that you are a paint manufacturer rather than a trading company?
    As the one of The Top 5 paint manufacturer in China.We have many years of experience  since 1996 in production and export,welcome to visit our factory at any time.

 

2.How about the price ?
   We can offer the best wholesale price which depend on the quantity of the order.


3.I need to make sure the quality and the color .
   Our pleasure!We can offer the liquid Free sample for you to test and color chart.


4.If the product is not ideal, what can we do?
   We have perfect after-sales service to help to complete the construction smoothly.
   Even if there are any unexpected things in your order, we will assist to solve them.


5.What's your MOQ (min order quantity),production period and delivery time? 
   Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.


6.I want to put my Logo on the packing .
   We can accept the OEM, waiting for your details requirement.


Mr. Jimmy Li
Tel: +8613535446330
WhatsApp/Wechat: +8613535446330
Email: lizm@maydos.cn

Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам