Двухсторонние петли для шкафа fgv по оптовой цене

Сохранить в закладки 989293139:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики


Commodity Two way kitchen door hinges
 Item No. GW-FH-G022
 Material Cold-rolled steel
 Finish Nickel plated
 Size Full-overlay,half-overlay,Inset-overlay
 Opening angle 90 – 115 degrees
 Cup diameter 35mm
 Cup Depth 11.3 mm
 Recommended Door Thickness 13-19mm
 Weight 55g~75g/PCS, According to your requirements
 Cup Hole Spacing 48mm
 Plate Hole Spacing 32mm
 K(Distance from edge of door to the cup) 3mm – 7mm
 Thickness of arm 1.0mm

 

If you have any question,pls contact us.

 

 

How to Choose a Cabinet Hinge?
Many elements combine to create the overall look and design of your kitchen. Most of these elements should reflect your personal taste and style, as well as complement each other. Although homeowners rarely give them any thought, cabinet hinges can be very prominent and completely change the overall style of your cabinets and of the room.

 

 

 

 

 

 Full-overlay:

 

 iron-4hold-twoway-1-1.jpg

 Half-overlay:

 

iron-4hold-twoway-1.jpg

 

Full-overlay:

iron-4hold-twoway-2.jpgiron-4hold-twoway-3.jpgiron-4hold-twoway-4.jpg

 

Poly bag packing:

 

iron-4hold-twoway-5.jpg

 

How to install cabinet door hinges?
1.Make a guide so that all of the hinges are placed correctly for even cabinets. This is achieved by simply cutting a block in a length of 2 inches. Place this at the top of the cabinet frame, and mark a line right below the wood block. Repeat this for all of the top and bottom of the frame so that you can have proper hinge placement.
2.Get the chalk line and your ruler. Have a helper place the cabinet over the empty space and mark it with a pencil. Measure how high it is above the space where the cabinet will be going. Go to the other end of the cabinet frame and measure the same distance that you had with the other side. Mark it off. Take the chalk line and have the helper hold one end of the chalk line while you take the other end to the other side of the cabinets. Mark the line with the chalk line by pulling the line away from the cabinet frame and letting it snap back onto the cabinet frame. This will ensure that your cabinets are straight.
3.Take the hinge and place it on the frame of the cabinets above where you marked it off and drill a small hole. This is to ensure that you do not splinter the wood. Screw in your screw with a drill or use a screwdriver. Do this for all of the hinges.
4.Align your cabinets with the line and drill mark the holes on the door. After that take the cabinet door off, and place the hinge at a 90 degree angle. Have the helper align the hinge holes with the mark that you made. Make a small hole in the door with a drill and drill bit. Screw the screw in, and you have successfully hung hinges and cabinets.

 


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам