Share on:
Application and characteristics
ZL900X500 6N serious automatic partition assembler machine is optimized to be a new partition assembler devices on the basis of absorbing the advantage of equipment at home and abroad in our factory. The equipment takes the place of the traditional manual operation made, automatic complete insertion of clapboard, saving labor costs, effectively improve the production efficiency at the same time. It is the ideal packing equipment of fruit and vegetable, glass ceramic, plastic and so on.
Structure features of 900x500-8N Automatic clapboard partition assembler with automatic collection system
1. Suitable for the auto insertion of all kinds of carton clapboard.
2. Vertical direct using vacuum adsorption feeding, landscape orientation using servo feeding , quick and accurate .
3. Longitudinal and transverse to cross the two pieces of paper at the same time.
4. Longitudinal feeding shaft adopts electric lifting .
5. Landscape orientation feeding worktable lifting adopts electric adjustment .
6. Electric adjust the clapboard height in landscape orientation .
7. Output in double work positions, high efficiency and energy saving.
8. Touch screen input control, electric to adjust the clapboard parameters .
9. Comprehensive using of pneumatic and electric control, to ensure the advancement of machine control .
10. Using compressed air storage tanks for gas centralized supply, gas supply pressure stability, enough gas source.The gas devices get the gas from the primary tracheal , independent control, no influence between each other .
11. Equipped with fault detection device, auto stop the machine when paper blocking .
Power supply | 380V / 50Hz | 3 phases - 4 lines |
Power | 10 KW | Not including the air compressor |
Host belt speed | 15-30m/min | |
Clapboard combining form | 3 * (1~N) | >In double working station |
Longitudinal clapboard feeding track number | 6 | |
Horizontal clapboard feeding track number | 1-12 | |
Clapboard size | Length L=120-500mm | Clapboard thickness 1.5-7mm |
Height H=70-300mm | ||
Width W=120-450mm (double station) |
Width W=120-900mm (single station) |
|
Lattice spacing C=50~150mm | ||
Lattice spacing D=35~150mm | ||
Working speed | 30~60 groups / min | Working speed is connected with clapboard size and clapboard combining form . |
Note : when the width of clapboard is greater than 450mm , the machine just can work in single station . |