Реалистичный мягкий силиконовый жидкий резиновый материал для искусственных рук, ног, рук, ног/протеза

Share on:


Price:6,11 $ - 8,75 $
Price in USD:Details

Quantity:


Product Overview

Description



Product Description

Product Description


Description of Medical liquid silicone rubber to make body prosthesis :


HY-E605 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1 . It can cure at room temperature as well as under heat . It’s a kind of food grade silicone and mainly used for mold making and silicone fake breast.


.jpg


 


Application of Medical liquid silicone rubber to make prosthesis :


HY-E605 silicone rubber is mainly used for making molds of concrete stone,GRC,polyurethane products ; resin products;wax, candle decoration ; rapid prototyping and tyre molds; chocolate,candy and similar products. Or it can mainly used for making doll dolls and doll toys.


 





Technical datasheet


 






























































Model



Color



Mixing



Pot life



Curing



Hardness (Shore A)



Tensile-strength



Tear-strength



Viscosity



Shrinkage



Elongation



ratio



(mins,



time



 (MPa)



(kN/m)



(After



rate



(%)



(%)



under



(under



 



 



A/B mixed,



(%)



 



 



25)



25)



 



 



mPa.s)



 



 



HY-E605



Translucent



1:1



20~40



3-5hrs



2



2.5+1
/-0.5



8+4
/-3



3000+1000
/-1500



≤0.1%



≥400%



 


Characteristics of Medical liquid silicone rubber to make body parts :


*An exceptional fluidity and good operability, easy to demold
*Good tensile and tear strength
*Outstanding bubble releasing
*Non-deformation
*Low shirinkage
*Aging resistance ,high temperature resistance (220℃)
*Environmentally, food-grade


.png




.jpg 



Pouring or Brushing



  • 1.Stir the base (Part A) well beofre use (except when depending on machine ).

  • 2. Shake the catalyst container (Part B) well before use.

  • 3.This is a 100 Part A to 5 Part B mixing ratio by weight.Weigh the desire amount of base into a clean mixing container.

  • 4. Weight the proper amount of catalyst into the container. Mix the base and catalyst together by stirring with a stick until a uniform color is obtained. Scrape the container walls and bottom well to insure a thorough mix.

  • 5. Though it is often unnecessary to deair the material due to its low viscosity some may choose to do so. If so,place the container into a vacuum chamber and evacuate the entrapped air from the mixture using a vacuum pump capable of achieving 29 inches of mercury vacuum.The mixture will rise, crest and then collapse in the contanier. Interruption(bumping) of the vacuum may be necessary to prevent overflowing the container. Keep the mixture under full vacuum for 2-3 minutes.

  • 6. Bleed air slowly into the vacuum chamber. When the chamber is at atmospheric equiplibrium,remove the cover plate and take out the container.

  • 7. Pour the deaired material slowly in a steady stream from one end of the mould so that the material flows evenly over the pattern. This should minimize emtrapment of air bubbles under the flowing material. A”ready”mold may be poured firstly over the pattern, which will also help reduce the possibility of entrapping air on the patternand in the cured rubber.A mold release agent may be applied on the pattern first to improve release.Allow the rubber to cure for 2-4 hours at 24C


 




 



Company Information


Shenzhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a science and technology corporation which is engaged in production, R&D, and sales of silicone rubber. Today we are recognized as the global leading manufacturer of Mould Making Silicone Rubber, Condensation Silcone Rubber, Addition Silicone Rubber , Life Casting Silicone Rubber , Silicone Leather etc. and our silicone rubber get great reputation around the world ! In 2013, we became the biggest exporter of liquid silicone rubber in China by exporting silicone rubber to 7 continents when our silicone rubber has been well-received by 138 countries and areas !


 about-us1-Without-the-watermark


Shenzhen Hong Ye Jie Technology Co., Ltd.'s Vision: Let us family happiness, successful career, happiness and well-being.


 


Shenzhen Hong Ye Jie Technology Co., Ltd.'s Mission: Help us change destiny, improve your income, create value, to achieve wealth free.


 


Shenzhen Hong Ye Jie Technology Co., Ltd.'s Value, 


CUSTOMER SATISFACTION: We listen, understand and act to meet our customer's needs, exactly.


PURSUE DREAM: We work to create products, producesses and technologies that meet environmental and social need.


Do THE BEST: That bring us up to worldwide silicone rubber manufacturer leader.


BE SERIOUS: We work seriously to ensure our products and service are safe, effective.


WIN-WIN SITUATION: This is one of the core value that drive our business decisions.


 liquid silicone1_meitu.jpg


liquid silicone rubber.png 





Sample


As usual,we will offer  sample for your test,and send to you by FEDEX,it about 3-5 days to your door.if need,pls feel free contact with me,Monica will arrange the sample as soon as possible.


packing

 certificates.jpg 





Clients Visiting


1.jpg


.jpg 





Contact


 


SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD.


You can call me Tina,


ADDRESSNo. 4163, Ping Di Street, Long Gang Road, Long Gang District, Shenzhen, GuangDong,China


Tel: +86 18938867561


Phone/Whatsapp: 18938867561


QQ: 2355542571


Email: hyb@szrl.net


 




0.0093 s.