Ferro silicon 5-25mm Magnesium Rare Earth Nodulizer for Casting as Inoculant and Nodulizer

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description



Products Description


Function and characteristics of nodulating agent:
Stable composition control, small segregation, low MgO content, stable reaction, high absorption rate of Mg, safe use. Less slag and less oxide. Can adapt to different production mode.

Use of nodulating agent:

The spheroidizing temperature is one of the important factors that determine the absorption rate of magnesium. The lower the treatment temperature, the better the absorption rate of magnesium. However, in order to ensure a certain pouring temperature, the treatment temperature should be between 1450 ℃ and 1500 ℃. If the same molten iron ladle is used for continuous treatment, although the molten iron ladle is preheated, the molten iron should be raised by 20-30 degrees and returned to the usual treatment temperature from the third and fourth times, so that stable results can be obtained. In the injection of molten iron need to pay attention not to let the molten iron directly into the concave weight, and should control the punching process in a short time, let the nodulating agent reaction while pouring into the molten iron, should avoid in the nodulating agent reaction after the end of the continued pouring into the molten iron.



Magnesium Rare Earth Nodulizer


Name
Item
Chemical Composition(%)
Mg
Re
Si
Ca
Ba
AI
Fe
FeSiMg5RE1
5-1
5.5-6.5
0.5-1.5
40-46
2.0-3.5
appropriale
<0.8
balance
FeSiMg5RE2
5-2
5.5-6.5
1.5-2.5
40-46
2.0-3.5
appropriale
<0.8
balance
FeSiMg6RE2
6-2
6.0-7.0
1.5-2.5
40-46
2.0-3.5
appropriale
<0.8
balance
FeSiMg7RE2
7-2
6.5-7.5
1.5-2.5
40-46
2.0-3.5
appropriale
<0.8
balance
FeSiMg7RE3
7-3
6.5-7.5
2.5-3.5
40-46
2.0-3.5
appropriale
<0.8
balance
FeSiMg8RE3
8-3
7.5-8.5
2.5-3.5
40-46
2.0-3.5
appropriale
<0.8
balance
FeSiMg8RE5
8-5
7.5-8.5
4.5-5.5
40-46
2.0-3.5
appropriale
<0.8
balance
FeSiMg8RE7
8-7
7.0-9.0
6.5-7.5
40-46
2.0-4.0
appropriale
<0.8
balance


Notice:We can meet all kinds of customized products required by customers.


Feature:
High absorption rate of Mg-RE alloy,Stable nodularization reaction on casting,Ensure better performance on graphite nodularization,reduce shrinkage.






Why Choose Us


Wuxi Huanjiang Burden Charge Co. Ltd.was established in 2000, located near the Beijing-Hangzhou Grand Canal with a long history in China. Mainly engaged in ferrosilica, fermanganese, rare earth magnesium silicon alloy, inoculant, recarburizer, slag removal agent, iron sulfide, deoxidizer, thermal insulation covering agent, iron phosphorus, silicon carbide and other dozens of alloy materials.
After more than 20 years of struggle, the company has established long-term cooperative relations with metallurgical, steelmaking and casting industries all over the country. We always adhere to the principle of honesty and mutual benefit. We welcome friends from all over the world to contact us for win-win and common development.




OUR PROMISE,YOUR QUALITY




Production Process


Quality Control for Our Melting Process
1、Raw materials are added in perfect order for producingmore Mg-Si and reducing the loss of Mg.
2、The thickness of our alloy ingot is under controlled within 10-15mm,if under 10mm,it will increase MgO.if above 15mm, it will reduce the uniformity of our alloy ingot.
3、We will clean the surface of ingot after alloy solidified.Oxide,impurity,and powder of the surface will beeliminated from the surface.




Quality Control


To ensure the best and stable quality,we check more than four times for one orderby spectrometer and chemical test,including raw materials,production,final products.




X-Ray Fluorescence Spectrometer
-Ray Fluorescence Spectrometer can radiate X-Ray according todifferent chemical elements,It can detect energy and wavelengthby different chemical elements.The software can transfer theminto data for all kinds of the chemical composition.
Features:
Immediate Analyze:quality test only takes 5 minutes.Physical analsis method that won't occur chemical reaction in the testing process.High precision&High sensibility Save time to make sample.Allow samples as solid,liquid,and powder shape.




Exhibition




Product packaging








FAQ


Q1: Are you a manufacture or trader?
A1: We are trader.

Q2: How are the products' quality?
A2: The products will be strictly inspected before shipment, so the quality could be guaranteed.

Q3: How to guarantee the quality?
A3: Our factory lab can supply the quality report ,and we can arrange third party inspection when cargo arriving loading port .

Q4: Can you supply the special size and packing?
A4:Yes, we can supply the size according to buyers’request.

Q5: What's the MOQ of trial order?
A5: No limit,We can offer the best suggestions and solutions according to your condition.

Q6: How long is delivery time?
A6: The delivery time will be determined according to the quantity of the order.

Q7: What are the payment terms?
A7: Usually T/T,but L/C are available for us.

Q8: Do you provide samples?
A8: Yes, samples are available.




0.0184 s.