1. Adjust the mix ratio by Ratio Controller ex) Setting on 2:1
2. Immerse the suction tube in paint can.
3. Open the Air valve. CAUTION! ※ (Set up the air pressure as 3kg/cm2 for test)
4. Run the pump, material and solvent comes until the Air Spray Gun, carefully check all connections in the system for leaks.
5. If there are leaks, shut off pump and release system pressure.
6. Tighten connection start pump again, and check to be sure leaking has stopped.
7. Check the Air Pressure, and Start the work with the proper pressure.