High flow CGA540 Click style Aluminum Medical Oxygen Regulators

Share on:


Price:$15.00 - $25.00
Price in USD:Details

Quantity:


Product Overview

Description



Product Description


QQ20180914141508.jpg


 


OXYGEN FLOW CONTROL REGULATORS


Oxygen flow control regulators are pressure reducing devices which lower oxygen pressure from a cylinder, to levels that can be safely used by the end user.


Oxygen flow control regulators are intended for the administration of oxygen to patients who need increased oxygen levels to improve their breathing conditions. In addition, some models may  be used in emergency situations. In an emergency situation, be sure to contact a physician or EMS immediately.



























TYPE



INPUT PRESSURE



OUTPUT PRESSURE



OUTPUT CONNECTION



FLOW RANGE



CGA870



3000psi Max



50psi Fixed



DISS/Barb/Quick Adapter



0-2L/min, 0-4L/min, 0-8L/min, 0-15L/min


0-25L/min



CGA540



3000psi Max



50psi Fixed



DISS/Barb/Quick Adapter



0-2L/min, 0-4L/min, 0-8L/min, 0-15L/min


0-25L/min



 


Set-up(CGA870 style)


1.      Inspect the cylinder following the instructions of your gas supplier. Be sure to purge the cylinder valve seat of debris.


2.      Inspect the regulator for oil grease. If these are visible, do not use the regulator.


3.      Be sure the sealing washer is in place n the inlet to the regulator.


4.      Slip the Yoke over the cylinder post and fit the pins into the holes on the cylinder valves. The pins should fit easily into the holes.


5.      Tuen the T-handle clockwise until the screw point is seated in the dimple on the cylinder valve. Be sure the regulator is tightened securely onto the cylinder.


6.      Attach the oxygen supply tubing to the outlet connection of the regulator.


Set-up(CGA540 style)


1.      Inspect the cylinder following the instructions of your gas supplier. Be sure to purge the cylinder valves seat of debris.


2.      Inspect the regulator for oil or grease, if these are visible, do not use the regulator.


3.      Gently thread the large nut on the regulator onto the connection on the cylinder valve.


4.      Tighten the nut with a wrench until snug.


5.      Attch the oxygen supply tubing to the outlet connection of the regulator.


Instructions for use:


1.      Be sure the regulator is in the “off” position by rotaing the knob counterclockwise to the “0” position.


2.      For safety, be sure you are not directly in front of or behind the regulator when opening the cylinder valve.


3.      Slowly turn the cylinder valve on(counterclockwise), about one full turn.


4.      If you can hear a hissing sound, there is a leak in the system, turn the cylinder off and turn the regulator on to relieve any built up pressure. Try tightening the regulator to the cylinder and open the cylinder again. If this does not help, shut the system down again and contact a service representative. Never attempt to repair a regulator or cylinder yourself.


5.      Adjust the flow rate setting by turning the knob clockwise until the desired setting shows through the window.


6.      If the cylinder pressure falls below 300 psi, you should exchange the cylinder for a full one.


7.      Turn off the system, close the cylinder valve, wait for oxygen to flow out of the regulator, and turn the regulator to the “0” position.


8.      Never try to remove the regulator unless the cylinder is off and pressure has been relieved.



 


 





product category


QQ20180308130556.jpg


 





Related Products


 QQ20190925100224.jpgQQ20190925100232.jpgQQ20190925100246.jpgQQ20180308130610.jpgQQ20180308130614.jpg





usage scenario


.jpg


 





Buyer Feedback


 1.JPG2.JPG3.JPG4.JPG5.JPG6.JPG7.JPG8.JPG9.JPG10.JPG11.JPG12.JPG13.JPG14.JPG15.JPG16.JPG





Packaging & Shipping


.jpg


 





Company Information


 


QW.JPG


com.jpg


Our sales staff have been trained in professional knowledge and information, so we can provide the most professional services to our customers according to their needs;Our technical staff have conducted skills training and practiced in the workshop, with professional theoretical knowledge and rich practical experience.


.jpg


 


 





contacts


11.JPG                                         Xi'an Flowline Instrument Co.,Ltd


 


                                                                          Ms.Yvette      Sales Manager


                                                      Mob:   0086-15249270593         Skype:Yvette8445


                                                      Wechat: 0086-15249270593        WhatsAPP:0086-15249270593


                                                       QQ:2759716790                         QQ1376656754


                                           Ads: No.138 Jingwe Road, Gaoling Disctrict, Xi'an City, China




3.2465 s.