American style Nitrogen pressure regulator for copper cylinder

Share on:


Price:$18.00 - $25.00
Price in USD:Details

Quantity:


Product Overview

Description


Product Category

PRODUCT CATEGORIES

 
Product Description

 

 

top quality, low price, short delivery time

Product Detail

mediumgas
Product Keywordsgas regulator for grill,gas regulator for ghana,gas regulator adjustment

Features:
1.shall read this manual before applying the gas pressure reducer.
2. This manual reminds you of the following matters, which are intended to be safe and applicable to avoid personal injury to you and others.
3.Design and manufacture of this product Repeatedly consider safety, please be sure to comply with the following provisions and precautions, otherwise it will lead to the application of personal accident.

This series of pressure reducer using metal diaphragm and the mother of hard seal type, suitable for pure gas, the general standard gas, process gas and corrosive gas pressure reducer requirements.

I thoroughly remove the oil, water and dust at the location of the cylinder and piping system and the reducer, and once the impurities enter the gas pressure reducer, it will cause the polluting of the gas, obstruction of the gas passage or other troubles,

II If the thread on the pipe deformation, can not be installed with the gas pressure reducer, do not force connection, otherwise it will lead to management system and the gas pressure reducer on the damage, causing serious accidents.

Third, the operation

  1. Before the gas enters the pressure reducer, make sure that the piping system (including the pressure reducer) is purged or evacuated as required.

  2. Before the gas enters the pressure reducer, make sure that the pressure relief handle is in a fully unscrewed state (counterclockwise). Otherwise, the initial pressure at the initial stage of the air supply may damage the diaphragm, resulting in a pressure reducer Failure, serious will hurt the person.

  3, slowly open the valve on the inlet side of the valve, with soap or special detector on the pressure reducer at the connection leak detection.

  Note: When opening the air supply valve, the body may not be right or back to the pressure reducer.

 4, turn the pressure regulator clockwise pressure regulator, the pressure (or flow) transferred to what you need, and with soap or special detector on the pressure relief device at the connection leak detection.

   Note: If there is any abnormal mechanical vibration, noise, jamming or abnormal pressure increase during the supply of the reducer, it indicates that the pressure reducer has been faulty and should be stopped immediately.

Fourth, daily inspection

  1, gas pressure reducer no gas, confirm the pressure gauge pointer back to zero.

  2, in the gas pressure reducer containing gas, with soapy water (or household neutral detergent plus 10 to 20 times the water diluted solution) or a special detector to check the thread and the connection parts are leaked.

  3, after the gas, to confirm the gas pressure can be continuously adjusted.

  4, after the gas, to confirm that no gas leak from the safety valve.

Five, repair

If there is a series of circumstances, you need to replace the parts, at this time must not be disassembly, please contact the company or dealer.

1. When the gas pressure reducer contains gas, the gas leaks from the threaded connections.

2. When the gas pressure reducer does not contain gas, the pressure gauge pointer does not return to zero.

3. After the gas supply, the pressure can not be adjusted continuously.

4. After the gas supply, the pressure gauge pointer does not bounce

5. After the gas supply, the pressure is abnormally high.

6. Pressure gauge is damaged

Six important safety warning

This safety warning is valid for any media gas pressure reducer

I operator must be a qualified operator who has been trained.

 

II Before use, make sure that the pressure regulator is in a fully loose state (counterclockwise). Otherwise, the initial pressure of the air supply may damage the diaphragm, resulting in a major safety accident.

 III The need for periodic inspection of piping systems (including pressure reducers), especially when the piping system is subject to collision or vibration, should be leaked. To ensure the use of security.

 IV use of vibration, noise or other abnormalities found in the process, should immediately stop using.

 V The Company can advise on the material of the reducer according to the general material application form. But for the special media media, the company does not guarantee material compatibility, by the customer according to the sample of the material rotation and is responsible for their own.

Note:

I  The gas pressure reducer is shipped with the instruction manual / warranty card and certificate, please read the safekeeping.

II  The specifications of the gas pressure reducer are specified in the product warranty card product parameters.


 

Quality assurance:
18 months after shippment

This series of pressure reducer using metal diaphragm and the mother of hard seal type, suitable for pure gas, the general standard gas, process gas and corrosive gas pressure reducer requirements.
1. the pressure regulator is strictly prohibited to apply to other than the provisions of the gas, because some types of gas mixing may occur in complex chemical reactions, may cause damage to the reducer caused by the accident.
2. to the product specifications and working conditions to confirm.
Please check the following terms (a-f) and confirm the specifications of the gas pressure reducer according to your applicable requirements, since the gas pressure reducer contains high pressure gas. So it is important to confirm the working conditions of the product.
a.Applicable gas type
b. inlet pressure (primary pressure)
c. all pressure gauge (for the detection of inlet pressure)
d. The type and size of the fittings at the gas inlet
e. The type and size of the joint at the gas outlet
f. all gas flow
If the specifications of the gas pressure reducer do not match the applicable conditions, the gas pressure reducer will cause harm or cause gas leakage.
3. the work environment to confirm
The location of the gas pressure reducer should be fully ventilated, and even if applied to non-toxic, non-corrosive gases can cause personal accidents due to possible hypoxia.
4.to prevent oil, grease and other gas reducer pollution.
If water, oil or dust erodes the gas pressure reducer or enters its interior, it may cause damage to the product, causing gas to leak or damage its pressure regulating function.
I The gas pressure reducer front end must be equipped with no less than 20um precision filter device! The The
II The body of the gas pressure reducer does not add lubrication or grease.
5. the safety valve working conditions and confirmation
In order to avoid the abnormal situation caused by increased output pressure caused by gas pressure reducer and piping systems, equipment and other damage, the user can be equipped with a safety valve with a pressure reducer.
The pressure relief pressure of the safety valve arranged on the reducer at the factory is set to 1.2 to 1.5 times of the rated output pressure of the reducer. Do not change the pressure, please contact the company or dealer.
Be sure to pay attention!
For flammable gases, safety valve is strictly prohibited direct discharge, must be installed discharge pipe, the gas recovery or neutralization after discharge, the discharge pipe should be metal materials, shall not use plastic pipe or rubber tube.
6. on the cylinder
For the reducer directly connected to the cylinder, its maintenance and use should comply with the regulations on high pressure gas management and the relevant rules within you, the operation error will lead to gas leakage or damage to the gas pressure reducer, causing serious accidents.
Second, the connection
1. with the next pull the pressure reducer inlet and outlet joints thread in the cylinder valve or high and low pressure side of the pipeline to connect the reliable connection to prevent gas leakage. Do not turn the reducer body, should hold the body, turn the nut tight.
2. in the installation process, should ensure that the pressure regulator inlet and outlet joints in the reducer connection will not be loose, otherwise it will lead to gas leakage, causing significant safety hazards.

Packaging & Shipping

PACKAGE:

Standard export carton packing.

DELIVERY TIME:

5 working days after received your payment.

gas regulator for grill
Company Information
gas regulator for grill

Established in 2015, Runtop is a manufacturer and trader specialized in the research, development and production of electronic Repair products.

We are located in Xi'an China, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

Contact Us

Tel: 0086-15249270593
QQ: 2759716790
Wechat: 15249270593
Whatapp: 15249270593
Add: No.138 Jingwei Road, Gaoling District, Xi'an City, China

gas regulator for grill
 

4.9812 s.