Share on:
1. Introduction
1.1 Measurement range: AC voltage: AC80-300V or 200-450V; AC current: 0-100A
Active power: (measurement voltage AC80.0-300.0V) 0.0-30000w (ac200.0-450.0 V: 45000W)
Electric energy: 0.000-99999kwh, the decimal point is automatically converted
Time accumulation: 0.00-999.59 h
Power factor: 1.000-0.000
Measurement speed: about 2 times per second
Load width: meter occupies 3P circuit breaker position
Built-in transformer: measuring circuit conductor through the instrument to the right of the round hole (round hole diameter of 11 mm can cross the maximum 12 square (mm) standard copper wire/can meet the maximum load current is 100 a) note: the load through the instrument round hole through the above or below, does not affect the current measurement accuracy.
The external transformer (hole diameter 15.5mm) can meet the national standard 21-25 square (mm) standard copper wire through
IF USER NEED MEASURE THREE PHASE THEN SHALL BUY THREE PCS OF THIS PRODUCT
1.2 Installation:
Modular DIN Rail Products offer a wide range of functions to be integrated in electrical installations with significant benefits for the user, complete range of DIN-mounted electricity Meters together with communication options. It is designed for high level performance, safe and convenient to install.
2. Technical Parameters
Model No. | D52-2042 | D52-2047 | D52-2048 | |||
Casing | ABS Anti Flaming material | |||||
Rated Voltage | AC80-300V | AC200-450V | ||||
Rated Current | 0.2-99.9A | 1-200A | ||||
Display | 0.5 inch | 0.31 inch | 0.31inch | |||
Mesure speed | Twice per second | |||||
Power Consumption | Less than 0.2VA | |||||
Accuracy | Class 1.0 | |||||
√ | √ | √ | ||||
Ampere (A) | √ | √ | √ | |||
Active Power (W) |
| √ | √ | |||
Power Factor |
| √ | √ | |||
Active Energy (kWh) |
| √ |
| |||
Temperature range | -10 ~ +65℃ | |||||
Humidity | ≤80% | |||||
Weight | 145g | |||||
Installation | 35mm Din Rail | |||||
Dimension | 54x80x64mm |
PS: The instrument is only suitable for pure AC 50-60HZ of electricity supply, can not be used for square wave, inverter output and sine wave correction circuit to measure the sine wave, or the instrument will be permanently damaged!
Manual:
1.Connect the measuring voltage to the 1 and 2 terminal.
2.Connections of meter with internal current transformer as graph 1. Make the wire through the hole in the meter and the direction chose arbitrarily.
3.Connections of meter with external current transformer as graph 2. Make the wire through the hole in the meter, and connect the two wires of the secondary transformer to the 3 and 4 terminal.
4.When power on, the meter will display the measure result of the AC voltage (V), AC current (A) and active power (W)and the correlative red led will light up.
5.When press the button of SAM CK (on the right of meter) down, the meter will change to display the measure result of power factor ( Cos ), electric energy of cumulative time (h) and electric energy (kwh) and the correlative red led will light up.
6.When press the button of SAM CK down again, the meter will display the measure result of the AC voltage, AC current and active power.
7. When power off, the meter can save the value of electric energy and electric energy of cumulative time, and go on cumulating data when the meter power-on next. When the meter is displaying electric energy, you can press down the button of SAM CK last for five seconds, then the electric energy and electric energy of cumulative time will to be zero and start to cumulate when release the button.
Wring Diagram:
Dimension
WHO WE ARE ?
HUABANG, one of leading producer of lower voltage products such as Energy Meter, Current Transformer, Frequency Inverter, Soft Starter, Power Meter, We specializes in research, design and manufacturing with an emphasis on continuous improvement, innovation and high performance and cost-effective solutions HUABANG has developed as a global manufacturer.
We are committed to providing high quality, high performance products to our customers
1. Q: Why choose us?
A: We are professional energy meter manufacturer 24years and 15years golden supplier of Alibaba
2. Q: Do you have any certificates
A: We have CE, RoHS, CCC, CQC, ISO9001:2015 Certification.
3. Q: How about your products quality inspection?
A: We have professional QA and QC teams, 100% quality inspection is performed before goods out of factory.
4. Q: Can you accept to use our logo?
A: we accept OEM production and can make customized product.
5. Q: What’s your quality guarantee?
A: we provide repair or replace service within 18months if energy meter is not working properly.