EXL 6X1/2X1 8A MED nylon fabric surface conditioning convolute wheel

Share on:


Price:RUB 743.28
Price in USD:Details

Quantity:


Product Overview

Description

Product Description

Deburring Excel Convolute Abrasive Wheel (DEXL)

The DEXL convolute wheels are especially well suited for a broad range of deburring and finishing needs and are designed for top performance and value on a variety of applications. This wheel family contains a unique resin system, which help to enhance the heat resistance. DEXL wheels can demonstrate performance on stainless steel, titanium, and high nickel alloys.

Features

>Smear and heat-resistant formula
>Dense web construction
>Different density levels
> Two grits, A Medium and SC fine

Benefits

>Suited for a broad range of deburring application
> Use both wet and dry
>Smear-resistant and cool cutting, no contamination of workpiece
>durable for heavy deburring, removing parting lines on exotic metals

Detailed Images
Applications

Debur and Sharpen of shuttle

Wheels shall be Fine finish with high efficiency, 

Shuttles

Sand the sharp area.

RF 9S FIN 8X1X3

Durable, high cut and still conformtable

Models

Grit Size

The Grit Size is aligned with global standard, an reference could be find in right table.

Safety

Safety Awareness

      The safety performance of 99D grinding wheel is strictly tested and has clear safety operation instructions. However, it is still essential to install and use it properly and stick to the safety instruction. Each product is labeled with the MOS: Maximum Operating Speed (below table). The actual operating speed can not exceed the maximum operating speed.
Moreover, Please also pay attention to the mechanical protection, wear the mask, safety glass and safety shoe. Pay attention to the ventilation of the workshop. 

When operating convolute wheel, we should pay special attention to the arrowhead marked on the product, and the direction of the arrow is the rotation direction of the product. The product must be operated with the right direction.

FAQ

Factors to be considered before choosing

The composition, shape and material type and its hardness of the workpiece.
The roughness and surface state before the working procedure
The surface conditioning effect that the workpiece needs to be achieved, the component tolerance requirements
Tools, speed of equipment, installation size of equipment and other parameters
Grinding steps needed for processing work pieces successively

Product Choose...

Usually, we need to consider the structure of the parts, the size of the grinding wheel, and the speed of the tool and other fixed circumstances.
The SP series product is a kind of laminate structure, the edge surface is the cutting face, the cutting is relatively higher than convolute wheel, it has no rotation direction.
Convolute wheel series (LDP, DEXL, RF, LP...) is the winding structure, the inner hole size is generally 1, 3, 5, 8 inches, plane surface is the cutting surface. When it is used, it is directional and can only rotate in one direction. The arrow identifies the direction of rotation. The convolute wheel is more durable than the SP wheel, which is more suitable for sharp and harsh applications such as deburring.

Product to replace

Replacing similar products: SP series can replace various kinds of unitized wheel, fiber polishing wheel and cloth wheel with mineral; LDP, DEXL, RF, LP can replace the imported brands convolute wheels with similar application purpose.
Cross product substitution: replace steel wool, steel wire brush, abrasive, hard bristle, manual file, polishing paste, grinding fluid, grinding wheel, rubber scraper, manual sandblasting equipment, dressing, cleaning cloth etc.

0.0105 s.