ezcap TapeBT 1 Bluetooth Cassette Player with radio AM/FM

Product Overview

Description

ezcap   TapeBT 1 Bluetooth Cassette Player with radio AM/FM---ezcap244

 

 

ezcap244 TapeBT 1 Bluetooth Cassette Player has built-in Bluetooth transmitter. It will search the Bluetooth receivers after you press PLAY button on TAPE mode or switch to AM/FM mode, and blue LED on back of device will quick flash.

 

Device will pair successful after few seconds, and LED slow flashes if you turn on your Bluetooth speaker or Bluetooth earphone.

 

At this time, the built-in speaker of device will automatically turn off. If turn off the Bluetooth Speaker, the built-in speaker will turn on automatically.

Overview

 

1 – Speaker

 

2 – FM / AM adjustment frequency indicator

 

3 – Antenna

 

4 – Battery compartment

 

5 – Stop playing tape

 

6 – Tape fast forward

 

7 – Tape rewind

 

8 – Play tape

 

9 – Volume adjustment

 

10 – 5V DC jack

 

11 – Earphone jack

 

12 – Radio tuning knob

 

13 – FM / AM / TAPE switch

 

14 – Bluetooth indicator LED

 

Frequently Asked Questions

 

1, Cannot boot

Please check if the battery is charged or the power adapter is properly connected.

 

2, No sound

Please check whether the volume knob is at the minimum volume.

 

3, No radio program or unclear

Please confirm whether there is radio signal or strong interference at your location.

Buildings with concrete structures, electromagnetic signals, operating electrical equipment, etc. will cause shielding or interference to the radio signal.

 

4, Cannot transmit sound to Bluetooth receiver

Please make sure the Bluetooth receiver has been turned on, and notice the blue LED on the back of device is quick flashing, it means device is searching Bluetooth receiver.

On TAPE mode, and you don’t press PLAY button to play tape, device will not start to search Bluetooth receiver. Or when you press STOP button to change music tape, device will turn off Bluetooth transmitting until you re-press PLAY button to play tape.

Device will stop Bluetooth searching within about three minutes if no Bluetooth receiver can be paired. You need to switch to TAPE mode, no any buttons have been pressed, then press PLAY button or switch to RADIO mode, then device will re-start to search Bluetooth receivers.

 

5, Bluetooth cassette and Speaker paired successfully, but no sound.

Please restart Bluetooth speaker, and wait for them to re-pair Bluetooth successfully.