Salt centrifuge factory
Salt centrifuge factory

Salt centrifuge factory

Share on (1600460897137):


Price:$27,000.00

Quantity:


Product Overview

Description



Product Overview


Salt centrifuge factory
This two stage pusher centrifuge is used for solid washing,solid liquid separation , the solid can be the kinds of
crystal/granular /fiber with particle more than 0.004 mm and the concentration > 40% . Widely for NaCI , NH4CI ,KCI ,Ammonium chloride ,and other crystal and granular solution.

Model HR230N(P23),HR400N(P40),HR500N(P50),HR630N(P60), HR850N(P85),HR1000N(P100)


Description
Compact designComplete automatic
High capacity
Lowest moisture
Washing/dewatering separately
Remote control
Resistant to high and low temperature
Explosion proof is available.


PRODUCT SPECIFICATIONS


Model
HR230-N
(P23)
HR400-N
(P40)
HR500-N
(P50)
HR630-N
(P60)
HR850-N
(P85)
HR1000-N
P100
Inner/outer basket
Diameter mm
180/230
337/400
410/500
560/630
720/828
920/1000
2
Filter mm
120/120
145/155
180/180
240/240
240/320
240/320
3
G. force
1306/1669
503/894
403/715
350/114
286/145
266/125
4
Speed rpm
1660-3600
1500-2000
1200-1600
1000-1500
1200-1400
660-1250
Main Motor
Power kw
3
11
37
55
75
90
Back Motor
Power kw
3
7.5
22
22
37
45
Capacity
t/hr
0.2-1.5
2-5
6-12
15-18
25-35
18-50
Size
L*W*H mm
1650*1250*750
2460*1280*1040
3600*1430*1820
3090*1600*1265
3700*1800*1300
4200*1900*1900
Weight
kg
800
2100
3670
4000
7000
12000


PRODUCT CONFIGURATION


Working Principle
Showing above the diagram,when the basket is rotating at full speed ,the suspension liquid to be separated is fed into the feeding pipe 1 and continuously sent to the distributor 2 . Under the action of centrifugal force, the suspension liquid evenly distributed on the first stage basket screen 3, and most of liquid phase goes through out the screen mesh and the hole of basket while the solid phase in the form of annular filter cake stays on the screen, when the first stage basket returns and pushes the filter cake moving forward a distance along the basket axial , and when the first stage basket process , the empty surface of screen is filled with the continuous suspension liquid again and forms new filter cake. With the continuous reciprocating movement., and the filter cake pulses forward and further
drying. The filter cake goes into the secondary stage basket from the first stage basket , the filter cake is loose and
redistributed on the secondary stage basket screen and pushed out of the basket ,continuously go into the collecting tank 5 and finally the filter cake moves out of machine from the tangential discharge port by the scraper 4 installed in the secondary stage basket (if not using the scraper, the filter cake will directly drop into the machine casting.


Structure
1.Washing Pipe 2 Feeding Pipe
3 Machine Casing
4 Secondary Stage Basket
5 Secondary Stage Screen
6 First Stage Screen 7 First Stage Basket
8 Bearing Box 9 Hollow Shaft
10 Push Shaft 11 Composite Oil Cylinder
12 Hydraulic Device 13 Vibration Isolation Foundation 14 Main Motor 15 Cooler 16 Oil Tank
17 Push Plate 18 Distributor
19 Scraper 20 Door Cover


The machine casing .
1. The casing Looking in front the machine , we can see there is a circle door on the casing , we can monitor the working condition of the machine well.
Also there is a feed pipe on the top of the casing, Screw conveyor for feeding is also available. And the solid cake outlet and liquid outlet at the bottom of the casing .
The material can be SS304, SS316L, Duplex 2205/2507, Titanium.


Inner of baskets
There are two baskets , the main motor drives the baskets rotating ,and the oil pump motor drives the baskets pushing . and the
screens are installed on the baskets for stopping the solid going with the liquid..
Rear of machine
There are main motor and pump motor devices. black back oil pump , kinds of instruments .
Bottom of machine
There is a counterweight at the bottom.It is used for balancing the gravity of the machine by filling the concrete .


Baskets
There are two units of baskets for one unit of centrifuge , they are all made of stainless steel .
Bearing
High quality FAG bearings to make sure the machine work well.
Motor
High efficiency B3 motors with UL, CAS and TUV certificates .Compatible for 3 phase 220/380/460/660v-50hz/60hz..


Product packaging




Successful Project


Salt production
Ammonium sulfate production
Transportation


SIMILAR PRODUCTS




FAQ


1.What’s the application of centrifuge?
This machine is used to wash and dehydrate the suspension with small cystal and powder, widely used in environmental,
pharmaceutical food, chemical industry .
2.How to clean the machine?
The machine has self-cleaning function. When the processing is finished, you just put one button and the machine will do the cleaning automatically.
3. How to choose the machine material?
For the material, we have stainless steel 304, 316 and 321 for your option. Generally SS304 is used. If there’s suspension with corrosion, then SS 321 /316 or TA is needed.
4.What’s the capacity of the machine?
Firstly we have different model with different capacity for this machine.
Secondly, the capacity will be customized according to concentration of the suspension. Higher the concentration, lower the capacity.
5. How is the processing result?
The finished cake moisture and solid lost rate is based on the material feature. And different machine just brings different
processing capacity. Also we can offer testing service to get realistic results.

Any questions, please do not hesitate to contact us anytime.


We Recommend

New Arrivals

New products from manufacturers at wholesale prices

0.1912 s.