Phrozen литьевой смолы W20 зеленый 500g для Смола 3D принтер ЖК 3d принтер УФ 405nm 3d печатная машина

Phrozen Castable Resin W20 Green is developed for reliable casting with clean burnout and zero ash content. It is designed for both jewelry and dental casting, specifically fine and delicate features such as milgrain, micro claw, and wired patterns plus engraved and raised text.

 

PHROZEN CASTABLE RESIN W20 BENEFITS
20% wax content.
Formulated for casting light to medium pieces.
Low shrinkage, high precision. Produces prints with smooth and crisp surface finishing.
With a minimal number of gates, you can easily cast anything you desire. Set up your printed models and clean up casted 3D models effortlessly.
No foul nor strong odor.

PHROZEN ABS-LIKE RESINS SPECS
Quantity: 500g per bottle
Recommended layer height: 50 um
Verified clean burnout with these investments: "Prestige Optima", "Plasticast" and "Ultravest Maxx"
Surface hardness: Shore D 50-55
Ash content: 0.0-0.1% (ASTM E1131; TGA)


Make sure to preserve resin at room temperature. Store in dark and ventilated conditions. 
After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
Keep resin away from kids and away from direct sunlight exposure.
Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
DO NOT dump resin. Please cure it and treat it as general plastic garbage.