Mapp oxygen and propane gas portable brazing and soldering welding equipment gas cutting nozzle

Product Overview

Description

American MAPP welding torch

MAPP/propane/butane/liquefied gas, effectively solving the gas problem of traditional acetylene welding torches.

material: brass
weight: 800 grams
size: 28X20X5.5CM

DANGER

EXTREMELY FLAMMABLE GASES USED WITH TORCH FIRE/EXPLOSION HAZARD CARBON MONOXIDE HAZARD

 

This oxygen brazing and cutting torch is unlike most hand held torches. It is designed to be used simultaneously with an oxygen cylinder and a Pro Gas or propane cylinder.The use of an oxygen cylinder results in the torch flame burning at much higher temperatures as it would without an oxygen cylinder. Do not use this torch until you become thoroughly familiar with its proper use and potential hazards. In particular, you must not attempt to ignite the torch while oxygen is flowing to the torch. Further, when turning the torch offALWAYSTURN OFF THEOXYGENBEFORE TURNING OFF THE FUEL GAS. Turning off the fuel gas while oxygen is still flowing could result in a flash back and an explosion.

Read and follow the instructions and warnings in this manual. Familiarize yourself with the torch before lighting and using. Review instructions and warnings periodically to maintain awareness. Do not try to operate before reading instructions and without being thoroughly familiar with this torch's use and potential hazards.

Failure to comply with these instructions and warnings may result in damage to property, serious personal injury, or death.