610*100mm Steel and Ceramic Abrasive Disc GXK51 Zirconia Sanding Belt OEM Supported for Polish Application
- Category: >>>
- Supplier: Dingzhou Ruifeng Diamond Products Co. Ltd.
Share on (1601225405158):
Product Overview
Description
Product Description
Abrasive Tool Sanding Belts
Material: | Zirconia |
Size : | 610*100 mm |
Grit : | 120# |
Sample： | Free |
Usage： | polishing of stainless steel, furniture,glass products,marble. |
Feature:
Flexible cloth backing provides ideal comfortable for blending and finishing contours and
complex parts
Lighter weight backing is ideal for medium to fine grades and reduces cost
Superior durability and cut-rate with consistent performance
Longer life than comparable aluminum oxide belts
lower cost per part and less time lost to belt changeovers
Flexible cloth backing provides ideal comfortable for blending and finishing contours and
complex parts
Lighter weight backing is ideal for medium to fine grades and reduces cost
Superior durability and cut-rate with consistent performance
Longer life than comparable aluminum oxide belts
lower cost per part and less time lost to belt changeovers
INSTALLATION INSTRUCTIONS
Temperature and humidity requirements The abrasive belt should not be stored in a place where the temperature and humidity change
greatly. The ideal temperature is: 18-220C; the ideal humidity is 40-65%. If the temperature is too high, the binder will age and
reduce the service life of the belt. Synthetic fiber matrix belts (such as polyester cloth belts) are sensitive to cold and cannot
be stored in cold warehouses.
If the humidity is too high or too low, the belt will be deformed, and the deformation will reduce the bond strength of the belt
sand layer. In particular, excessive humidity has a serious impact on the abrasive belt. In addition to water-resistant abrasive
belts, the general belts are used after being damp, and they are prone to discounts and wrinkles, which cause the belt machine to
be scrapped. In addition, the abrasive material is easily adhered to the surface of the abrasive belt when the wet abrasive belt
is ground, reducing the service life of the abrasive belt. The high temperature and low humidity have a great influence on the
paper-based abrasive belt, which makes the paper-based abrasive belt brittle and easy to break and scrap when used.
Temperature and humidity requirements The abrasive belt should not be stored in a place where the temperature and humidity change
greatly. The ideal temperature is: 18-220C; the ideal humidity is 40-65%. If the temperature is too high, the binder will age and
reduce the service life of the belt. Synthetic fiber matrix belts (such as polyester cloth belts) are sensitive to cold and cannot
be stored in cold warehouses.
If the humidity is too high or too low, the belt will be deformed, and the deformation will reduce the bond strength of the belt
sand layer. In particular, excessive humidity has a serious impact on the abrasive belt. In addition to water-resistant abrasive
belts, the general belts are used after being damp, and they are prone to discounts and wrinkles, which cause the belt machine to
be scrapped. In addition, the abrasive material is easily adhered to the surface of the abrasive belt when the wet abrasive belt
is ground, reducing the service life of the abrasive belt. The high temperature and low humidity have a great influence on the
paper-based abrasive belt, which makes the paper-based abrasive belt brittle and easy to break and scrap when used.
PERFORMANCE
Flexible cloth backing, lighter weight backing is ideal for medium to fine grades and reduces cost. Precision Shaped Grain provides superior durability and cut-rate, with consistent performance, which translates to higher production rates. longer life than comparable aluminum oxide belts, which means a lower cost per part and less time to change belt.
zirconia alumina abrasive belt suitable for heavy grinding and polishing with middle or heavy load, for steel, alloy-stell, cast
iron and nonferrous metal.
zirconia alumina abrasive belt suitable for heavy grinding and polishing with middle or heavy load, for steel, alloy-stell, cast
iron and nonferrous metal.
Lap Joint
Suitable for roughing working, with higher cost performance
Flap Joint
suitable for grinding and polishing wood board
S Joint
Suitable for finishing working, with no drawing on the surface
Flap Joint
suitable for grinding and polishing wood board
S Joint
Suitable for finishing working, with no drawing on the surface
Performance Display
1) Thickened abrasive cloth is more wear-resistant and has higher utilization rate
2) It is not easy to fall off and heat dissipation is fast when using strong resin abrasive
3) In the process of high strength grinding, it is not easy to break and has good impact resistance
4) Sand surface gravel is uniform, full and does not fall sand, sharp, wear-resistant
Packing & Delivery
100 pieces / box, 30 boxes / box
Company Information
Dingzhou Ruifeng Abrasive Tool Factory was founded in 2004, specializing in the development and manufacture of flap discs/wheel, sandpaper discs, Abrasive belt, sanding roll, non-woven abrasiveflap wheel, etc.
CHAOYIMOJU is one sub- brand of Ruifeng, sold to Foreign market.
Why choose us?
-- 17 years OEM Experience
Professional Abrasive Manufacturer / Strict Quality Assurance System
-- High Quality and on-time Delivery
Korean Advanced Production Technology / Experienced Workers
-- Perfect Service
Quick Quoting / Prompt Email Reply / Unscheduled Mail Return Visit
FAQ
1. who are we?
We are based in Hebei, China, start from 2004,sell to Southeast Asia(15.00%),North America(10.00%),Africa(2.00%). There are total about 50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Flap Disc,Sandpaper Disc,Flap Wheel,Abrasive Belt,Non-woven Flap Wheel
4. why you choose us as your supplier?
We have 18 years of experience in design and development,About Chaoyi
Dingzhou City, Hebei Province, Rui Feng Abrasives factory, was founded in 2004, located in Dingzhou City, Hebei province. Specializing in the development and manufacture of abrasive tool.
We are based in Hebei, China, start from 2004,sell to Southeast Asia(15.00%),North America(10.00%),Africa(2.00%). There are total about 50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Flap Disc,Sandpaper Disc,Flap Wheel,Abrasive Belt,Non-woven Flap Wheel
4. why you choose us as your supplier?
We have 18 years of experience in design and development,About Chaoyi
Dingzhou City, Hebei Province, Rui Feng Abrasives factory, was founded in 2004, located in Dingzhou City, Hebei province. Specializing in the development and manufacture of abrasive tool.
5. What is your terms of payment ?
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
6.How you can get free sample?
Leave inquiry or message us on Alibaba about what products you are interest in.
7. Do you provide OEM service?
YES! Let us know the info of brand, packaging requirements. Details please chat with us on Alibaba.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
