Share on (60501744066):
Description of Products
| Relief for exterior painting, sand painting, stone-coating. |
| Spray gun made of stainless steel ands precision aluminum valve. |
| Selects required appropriate gas nozzle and spray nozzle according to material. |
| Large loosening cap ring, adjust the fluid nozzle and air nozzle concentrically. |
Rotating disc cap, change front and back side of the position of the gas nozzle, adjust the size of the nozzle point. |
Control gas volume of gas switch to adjust the air pressure from the nozzle to achieve the desired spray effect. |
Reasonable control of the spray gun distance and speed. After use, please wash, do not wild beat and knock. |
Picture of Products
Attention:
| 1.Do not damage air cap, paint nozzle and needle for each injection hole |
2.Please clean each part with brush in a diluent. Do not immerse the whole spray gun in the diluent. |
| 3.Please spray a small amount of paint to clean the paint channel. |
| 4.Carefully wash removable parts attached to them not to let any trash on them. |
5.By loading needle valve gasket, in order not to make needle valve seal screw overtight; please pull the trigger while tightening to make the needle valve edge flexibly moveable. |
| * Nozzle can be removed to clean. |
| * Spray evenly and exquisitely. |
| * Precisely made ,suitable for professional painting. |
| * Siphon intake, external mixing spray, oil spray are even and fine. |
| * Two-stage trigger, first blowing ,second painting. |
| * Adjustable spray form, spray width in circular or oval. |
| * Adjustable spray knob to control the volume. |
| * Applicable to water,Latex or oil-based paint. |
More Products





New products from manufacturers at wholesale prices