Share on (60533330441):
Cheap Laboratory Equipment Fume Cupboard Chemical Explosion Proof Lab Fume Hood with Duct
Lab fume hood can effectively eliminate the harmful gases produced in the experiment by the proper connection of the ventilation system in the laboratory to protect the safety of the experimenter. The laboratory fume hood must be provided with a guide plate and a B-PASS system to control the airflow in the cabinet and the airflow distribution at the opening. The BYPASS hole is opened above the door of the fume hood and the BYPASS hole is opened when the door is lowered so that the outside air is filled in the cabinet to maintain the surface wind speed, maintaining the balance between the indoor ventilation system and the ventilation volume of the fume hood, due to the sliding door caused by the increase in surface wind speed, to avoid the impact on the operator.
Structure
All steel lab fume hood
PP lab fume hood
Specification:
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
| \t | \t | ||
Inflow Air Velocity: ≥0.4m/S
Noise: 62db
Vibration Xyz Direct: ≤4μm
Illumination: ≥800lux
Fluorescent Lamp: 21w*2 28w*2 40w*2
Power Supply: 220v±10%, 60/50hz;110v±10%, 60hz
Consumption: 400w 500w 500w
Front Window Manual, Toughened Glass, Anti Uv
Working Principle
1. The fume hood is safe and anti-explosion without inflammable material
2. Adopting unique side weight structure and the removable roof and side panel, easy for the maintenance and upgrade of weight, electrical parts and pneumatic
3. The pp fume hood can be used for more ten years than other materials
4. The detachable guide plate is convenient for cleaning
5. The factory price and prompt delivery is available
6. We can provide 12 months warranty after receive goods
7. Operators are available to walk into the fume hood to operator if needed
8. Large room exhaust system, suitable for large laboratory instruments and equipment
Cheap Laboratory Equipment Fume Cupboard Chemical Explosion Proof Lab Fume Hood with Duct
Cheap Laboratory Equipment Fume Cupboard Chemical Explosion Proof Lab Fume Hood with Duct
Epoxy resin worktop is a whole core material, the entire board is corrosion resistant, Anti-acid and anti-alkali, the surface can be repaired after scratching, high strength, environmental protection, long life, good appearance of the finished product, is the best product of the current laboratory bench.
Fully steel integrated cabinet, use 1.0mm thickness high quality cold rolled steel plate, surface with acid pickling, phosphating and electrostatic power coating epoxidation for acid and alkali resistant and rust prevention.
The fan according to actual use require the use of domestically produced corrosion resistance of PP fan, the noise is less than 65 dba: duct site condition using PP duct, straight row of the wall or to the designated location.
Yellow cabinet is commonly used for storing flammable liquids.
Blue cabinet is commonly used to store weak corrosive liquids.
Use 5mm thickness anti-etempered glass combination with balance, the balance part is gratuitous type structure design, design of glass door operation left, right, push-pull, upper and lower open, flexible operating procedures, is safe to complete special experiment.
The use of touch-button electronic control panel adopts ventilator exhaust ventilation, water, electricity, gas and ventilation integrated panel control.
Baffles make the different altitudes harmful gases to be expelled from different segments.
If you are interested in the product, please click the picture and enter into its page
Laboratory Furniture such as bench, fume hood, air shower, cabinet are wrapped with bubble film then packed with wood case when the quantity less than a container (bulk cargo)
As for laboratory accessories such as eye wash, exhaust hood and faucet are wrapped with bubble film then packed with carton.
Customized packaging is also available here.
Loading Port: Guangzhou, Shenzhen, any port nominated by customer
Shipping Way: By Ocean, Air, Railway, or any way nominated by customer
Delivery Time: About 15~20 working days after payment (depends on quantity and detailed requirement. We can promise it will be shipped on time as we negotiated)
| \t |
1. Product can be designed by your special need
2. Our professional techology to guarantee the super quality
3. Factory manufacturing enterprise provide with you competitive price and superior quality
4. Have stable supply chain which can gurantee our product quality and prompt delivery
5. Trial Order small quantity for retail and wholesale are accepted
6. Our company has been a experience manufacturer of lab furniture for more than 12 years
New products from manufacturers at wholesale prices